Slight problem with new Core2Duo build, need help...

Paithar

[H]ard|Gawd
Joined
Jul 17, 2003
Messages
1,049
I started building my new Core 2 Duo build lastnight but I didn't get very far. Here's the basic specs of the new system...

ASUS P5N32-E SLI mobo
C2D e6700
Scythe Ninja Heatsink/Fan
Corsair XMS2 2GB(2x1GB) PC2-6400
BFG 8800GTX OC
X-Fi Gamers soundcard
Western Digital SATA HD
Samsung DVD burner
Dell 2407WFP LCD

This build has been my hardest one ever. Anyway, I get everything inside the case and I hook up the power but when I push the power button, the system turns on, however only one fan in the whole case turns on, the back one. The fan for the heatsink doesn't turn on, the front fan doesn't turn on and the fan that's on the side above the video card doesn't turn on. Therefore, when I go into the bios I can sit there and literally watch the cpu temp go up and up and up.

I hooked the fan on the heatsink up to the cpu fan connector and the other fans are hooked up to the various other optional fan connectors on the mobo. I'd really appreciate it if anybody could give me some ideas on what to check out here and what to try. I was really hoping to be playing my new system lastnight but this problem stopped me cold. I fiddled around for at least an hour and half on just this problem before I finally decided to go to bed.
 
turn off... the uhm... yah, wow, i'm still asleep. turn off the thing that automagically controls the fans due to temps.
 
Ok, I'll give that a try and see what happens. Can't do it until tonight though.
 
I would unplug everything that is not essential to get that thing running. I would also recommend listing the PSU you are using.
 
are all the fans plugged into the mobo? and yah, what PSU is it? If some are plugged into the PSU directly, are they plugged into "fan only" molex connectors (thermstatically controlled by the PSU)?
 
Actually all of the fans except the one that is working are plugged into the mobo. The one that is working is plugged into a FAN ONLY connector from my psu.

By the way, the psu is an Antec TruePower 650 or something like that. I don't remember the exact model but it is an Antec and a 650W. I figured since I don't have a lot of things in my case that a 650W psu should be fine. All I have in the case is the mobo, video card, hard drive, dvd burner and then four fans, well five fans if you count the psu fan and it too is connected to the power fan connector on the mobo. Actually, although I never really looked at it, I'm pretty sure that the psu fan is working too, I kind of forgot about it.

On a side note, I do know that the cpu fan connector should be working because when I first connected everything I didn't quite have the 8pin power connector for the mobo pushed all the way down and so when I first tried to turn on the pc, only two fans worked and nothing else. The two fans that worked were the one that is currently working and the cpu fan. For some reason though, once I pushed that 8pin power connecter all the way down and turned on the pc, the cpu fan quit working.
 
When I first plugged in the Scythe Ninja fan, it spun up, then stopped. Once I turned off the fan control, it started running at full speed all the time.
 
this is a bit obvious but make sure that you have all the connectors plugged into the mobo. there seems to be more every generation.
 
I am pretty sure it is the smart power function for the fan. The mobo controlled on. Used the intel version (should be selectable) and it will work fine.
 
Back
Top