• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Silicon Image 3114 RAID controller problems

D

Daneel

n00b
Joined
Sep 4, 2004
Messages
27
I've just installed a new Hitachi 250GB SATA drive on my Asus K8N-E Deluxe (NF3 250gb chipset).

I've already used the 2 SATA controllers that are on the mobo and am now using one of the 4 connected through the SI RAID controller.

Going into the BIOS I've tried a number of combinations of the options relating to this drive.

One of them is RAID, SATA or disabled for the Silicon Image controller. There is also a RAID option ROM which I have tried enabling. Doing that causes a number of other options to appear, most relating to which channel to use for RAID (primary master/slave, secondary master/slave, third, forth).

I also tried installing the SI3114 driver on the Asus site. Following that I had 3 BSODs shortly after booting up windows so I uninstalled it. I an see the new HD in the RAID BIOS but not in windows. Device manager shows an unknown, uninstalled piece of hardware but the SI RAID controller is listed under SCSI & RAID.

If any one can suggest how I might get the new HD to work I would greatly appreciate it.
 
You must log in or register to reply here.
Back
Top