• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Shuttle Front Panel Mod?

A

adamfelker

Gawd
Joined
Feb 19, 2002
Messages
686
A friend just bought a Shuttle, and she wants to do something to spice up the front panel. I recall seeing a mod where someone somehow installed a printed image behind the front acrylic piece. Does anyone remember who this was, how they did it, or where I can find some pictures of their work? Thanks!
 
check the post your workstation sticky in the case mods gallery. It's in the last few pages.

Basically, you remove the plexi, put a printed image in... replace plexi. Easy as pie.
 
If you can use a pair of scissors, you can do this mod.

Start by taking off the front acrulic cover. It is helad on by 4 allen screws located at the corners. Also take off the acrylic cover for the floppy drive and for the CDROM (if you stealthed your drives).

You'll notice a piece of "paper" behind each piece. Save those and use them as your template for cutting out your picture.

Find an image you like and print it out.

Lay the template over the images, draw a faint line with a pencil, and cut it out.

Reinstall the pieces in reverse order.

Simple as that.

Also, Shuttle sells EL backlit covers for the Shuttles. Definately look into one.
 
You must log in or register to reply here.
Back
Top