Same MAC Address with 2 Abit NF7S's rev2.0

WiGgLe81

n00b
Joined
Feb 22, 2004
Messages
2
Hello, a friend and I bought 2 NF7S's rev2.0 a while ago, and at every lan party we've been to together since we've had no success of being on the LAN at the same time. However, seperately all networking works perfectly. After forcing ip address's and lots of trouble shooting we finally took a look at our mac addresses from ipconfig /all...and they were both EXACTLY THE SAME!! This is with no software hacks of any kind. Now, we've changed his mac address with software so that we can be networked, but still the whole situation confuses me. I was under the impression that all networking devices had to have unique MAC addresses. Also, since its sorta a pain to have to worry about MAC addresses with software, is there a way to change the physical hardware mac address of one of our mobo's so we don't need to bother with hacks to network?? In conclusion, could anyone give us a general education on this whole mac address thing, as info on the internet has been scarce.

Any thoughts would be appreciated...Thanks...
 
Should this be in the Networking thread?? If so, could a mod move it please...thanks again...
 
This is a motherbaord issue...i have heard of it on other NF7S's

Have you updated the BIOS lately? I will try and dig up the info i had on the problem and post back when i have it...look around on some NF7S forums...
 
it happens in very rare cases. i've heard of one where it involved 3com network cards where a guy had 5 with the same mac address.


just think if your luck was different you would of won the lottery.
 
Happend to me with a couple of Intel Nics, and 5 SMC Nics.

Was really annoying.

RMAed all of them and just got them replaced.
 
if you flash your BIOS with AWDFLASH, and use the /mac: switch, you can specify a MAC address. The best way to get the options are awdflash /?
 
actually i didnt even think it was possible

strange

each vendor is assigned a range of numbers to assign to their NICs when they manufacture them... and they are supposed to be all unique.....the range of numbers to each manufacturer never cross eachother so there should not be a problem with having two manufacturers using the same address


or atleast thats the way i understood it
 
Originally posted by scientificTHEgreat
actually i didnt even think it was possible

strange

each vendor is assigned a range of numbers to assign to their NICs when they manufacture them... and they are supposed to be all unique.....the range of numbers to each manufacturer never cross eachother so there should not be a problem with having two manufacturers using the same address


or atleast thats the way i understood it

just like ip addys sooner or later your going to run out. whats the harm if a network card sold to china and one to australia the odds of them ever running into that problem are nil. some times it happens.
 
yes in a way it is just like ip address in a way it isnt

ip addresses are different being that they are hex and ip addresses are binary

you do the math

surely you can see the difference
 
I work at an cable ISP and our registration server made us figure out what the problem here is. We have a couple hundred thousand users and about 100 users (in our area) had that issue. It is a software nic and the mac is not updated correctly if you install the nic's windows driver. If you use the cdrom that came with the board, it fixes it.
 
good stuff bomber

physically hard coded NICs that are duplicated are RARE very RARE

its about the same chance as winning the lottery

actually less probably
 
Back
Top