Removing a bios chip

ciM2pHat4U

n00b
Joined
Aug 16, 2004
Messages
60
Does anyone know how to remove the bios chip, specifically on the abit ic7-max3 motherboard? Do I need a special tool?

Thanks in advance
 
some times you can and some times you cant depends if it permenantly on the motherboard or not

and yes you do need a special tool
 
yes you can on this motheboard. No you do not need a special tool, however there are special tools for it.

First MAKE SURE YOU SEE HOW THE CHIP SITS ON THE BOARD. If you didn't then you can look at the chip and you'll noticed a little dimple or a dash of paint on the chip, then if you look at the board where the chip sits inside, there will be a tiny arrow, just match the dimple/paint to the arrow.

Get a tiny screw driver, start from the corners and very CAREFULLY and SLOWLY pry at it. One corner to the opposite corner till it comes off.

That should be it.

To put it back in, just line it up with out any pressure, make sure it looks write and press down till ur sure its in.

You can take it out while the machine is on also! :eek: Only do this if needed though and if you have steady hands
 
Back
Top