Rebuilding the Beast

I'd like to go quad, but I really don't want 4 video cards in my system, plus I'd have to buy a bigger desk.

I'll be running 1 LCD connected to 2 cards in SLI enabled at all times so I can jump into games easily with the performance I want, and then a 3rd video card to run 2 LCD's, for a tripple monitor setup. I'd have to add a 4th card if I wanted quad LCDs, and that I aint gonna do.

Why would you need 4 video cards? Would you seriously be doing "heavy" tasks on all 4 screens that merits a separate (weird, spell checker says that's the right spelling for separate, but it looks odd to me) card for each? I doubt it, you know web browsing, dreamweaver, etc don't really require that much horsepower. Why not just have your SLI config run 2 screens? it's incredibly easy to flip-out the extra if you really think there's a performance hit., and then a dual head PCI-e x1 or PCI-e x4 card (I do not know what motherboard you own). hell, a PCI r9000 would drive screens 3 & 4 quite well. Hell, get a matrox triple play.

What I'm saying is that you don't need to run 1 LCD off of 2 SLI cards to get the best performance. The Video card editor should know that :) or maybe the games I play are speed-capped because I've never seen a FPS rate change from dual on SLI to single-on-SLI configuration. THen again, the games I play don't even write to a second screen, which means no work is happening on the screen, either.

My quad setup runs off a a dualhead 7900 + dualhead - rageII pci with 32? Mb .. 1280x1024 runs at full speed, with NO problems. Those screens run network monitors all day, which update at 1/2 second intervals.
/edit - FOR CLARITIES SAKE, THIS IS NOT THE SLI CONFIGURATION /EDIT

I mean, if you were running FSX spanned across 4 screens, maybe!

BUt, I know of almost no games that actually support multi-screen. Even things like premiere and maya really are suited at best for 2 screens
 
Very nice stuff. I just myself made the move to C2D and 8800 , and its been pure gaming enjoyment ever since. Enjoy it ! :)
 
Why would you need 4 video cards? Would you seriously be doing "heavy" tasks on all 4 screens that merits a separate (weird, spell checker says that's the right spelling for separate, but it looks odd to me) card for each? I doubt it, you know web browsing, dreamweaver, etc don't really require that much horsepower. Why not just have your SLI config run 2 screens? it's incredibly easy to flip-out the extra if you really think there's a performance hit., and then a dual head PCI-e x1 or PCI-e x4 card (I do not know what motherboard you own). hell, a PCI r9000 would drive screens 3 & 4 quite well. Hell, get a matrox triple play.

What I'm saying is that you don't need to run 1 LCD off of 2 SLI cards to get the best performance. The Video card editor should know that :) or maybe the games I play are speed-capped because I've never seen a FPS rate change from dual on SLI to single-on-SLI configuration. THen again, the games I play don't even write to a second screen, which means no work is happening on the screen, either.

My quad setup runs off a a dualhead 7900 + dualhead - rageII pci with 32? Mb .. 1280x1024 runs at full speed, with NO problems. Those screens run network monitors all day, which update at 1/2 second intervals.

I mean, if you were running FSX spanned across 4 screens, maybe!

BUt, I know of almost no games that actually support multi-screen. Even things like premiere and maya really are suited at best for 2 screens

First, SLI doesn't support multiple displays. Second, he doesn't need extreme horsepower to run 4 monitors, he needs 4 usable outputs. The two cards running in SLI mode have only one usable display output. Add another video card and that is still only 3 usable outputs on three video cards. To add another monitor, he would need to add another video card. That would give him 5 usable outputs on 4 video cards.

It's not that any application really wants to use more than one monitor. It's just a question of desktop space. He wants extra space to put more windows so he can run more programs at once. So do I, as a matter of fact, as do most people I know that use their computer for work.

For example, when I am coding, I have Visual Studio 2005 Pro using both monitors I currently own. Sometimes, I need to run other programs along with Visual Studio, like Photoshop or Internet Explorer, or hell even the Visual Studio Document Explorer help system thing. Right now, since I have only two monitors, that means I do a lot of flipping around between applications and jockeying the programs around so I can see what I am doing. It's very frustrating, and adding another display would help alleviate that problem. Or when I'm working on an article, I might have several explorer windows, Photoshop, Internet Explorer, FrontPage, and Excel all at once. Add that to the regular stuff that I have running, like Outlook and Winamp, and you've got a LOT of stuff going on, in a pretty small amount of desktop space.

It's not that the tasks are "heavy", it's just that sometimes people need to see more than one window at once.
 
First, SLI doesn't support multiple displays. Second, he doesn't need extreme horsepower to run 4 monitors, he needs 4 usable outputs. The two cards running in SLI mode have only one usable display output. Add another video card and that is still only 3 usable outputs on three video cards. To add another monitor, he would need to add another video card. That would give him 5 usable outputs on 4 video cards.
I guess I must just have just had a buggy driver then, cause, when I plugged in two LCD's to my SLI rig, they both worked. Maybe they were swapping out of SLI operation in 2d ?

It's not that the tasks are "heavy", it's just that sometimes people need to see more than one window at once.
Right.. and what I'm saying is, that you can do that on 2 cards (or in his case, 3...) I did it on 3. I currently do it on 2, but that rig is not SLI'd, just 2 dual head cards.
I -used- to have an SLI configuration, I do not anymore. When I HAD an SLI configuration, it ran 2 screens. Maybe it wasn't supposed to, but, nevertheless, it DID. When I would launch a game, one screen would flick-out. - The 3rd and 4th screen, which ran on another card completely, wouldn't! I could have a chatroom running, or whichever on screens 3 and 4. I couldn't interact with them, because the game (say, q4) would steal the focus of my system.

To Recap : In 2d desktop mode (i.e. windows) I was able to use 4 screens, on 3 video cards. Cards #1 and #2 were in SLI, and had 2 LCD's on them. Card #3 was standalone, PCI, and had two other screens plugged into it. IN 2d, all 4 screens worked. In 3d, LCD #2 would not, but LCD #1 worked fine.

That's on what is now system2, which has an EVga NF41 motherboard, (SLI) and, at the time, a pair of 6800s (GT I think...)One of the cards took a dump, and instead of replacing it, I opted for the x1950, and sold the other one.

Maybe because of my past experience i have a misconception about the ability of an SLI configuration. Our company doesn't sell any SLI's that are multi-monitor, so, I can't tell short of going to go build another one.
 
I'd like to go quad, but I really don't want 4 video cards in my system, plus I'd have to buy a bigger desk.

I'll be running 1 LCD connected to 2 cards in SLI enabled at all times so I can jump into games easily with the performance I want, and then a 3rd video card to run 2 LCD's, for a tripple monitor setup. I'd have to add a 4th card if I wanted quad LCDs, and that I aint gonna do.

I'd love to get ahold of one of those PCIe x1 video cards (made by Matrox I think?) to solve my multi-monitor woes, and so I can use two extra displays without disabling SLI.
 
I'd love to get ahold of one of those PCIe x1 video cards (made by Matrox I think?) to solve my multi-monitor woes, and so I can use two extra displays without disabling SLI.

Matrox makes at least one, pny makes a Quadro that is a 1x, and his makes a x1300 ati card that is 1x. I have the HIS which use to work great. Refuses to start in vista with the ati drivers. Haven't bothered to figure it out yet. Just driving my 2 screens off my main card(no sli in my system)
 
First, SLI doesn't support multiple displays. Second, he doesn't need extreme horsepower to run 4 monitors, he needs 4 usable outputs. The two cards running in SLI mode have only one usable display output. Add another video card and that is still only 3 usable outputs on three video cards. To add another monitor, he would need to add another video card. That would give him 5 usable outputs on 4 video cards.

It's not that any application really wants to use more than one monitor. It's just a question of desktop space. He wants extra space to put more windows so he can run more programs at once. So do I, as a matter of fact, as do most people I know that use their computer for work.

For example, when I am coding, I have Visual Studio 2005 Pro using both monitors I currently own. Sometimes, I need to run other programs along with Visual Studio, like Photoshop or Internet Explorer, or hell even the Visual Studio Document Explorer help system thing. Right now, since I have only two monitors, that means I do a lot of flipping around between applications and jockeying the programs around so I can see what I am doing. It's very frustrating, and adding another display would help alleviate that problem. Or when I'm working on an article, I might have several explorer windows, Photoshop, Internet Explorer, FrontPage, and Excel all at once. Add that to the regular stuff that I have running, like Outlook and Winamp, and you've got a LOT of stuff going on, in a pretty small amount of desktop space.

It's not that the tasks are "heavy", it's just that sometimes people need to see more than one window at once.

Exactly, with SLI enabled you currently only have 1 usable output from 2 cards, it doesn't support multi-monitor yet. I want SLI enabled at all times so I can jump into games easily. Every time I have tried enabling SLI it asks me to reboot, and I do not want to have to reboot to enable SLI, I want it on and there, ready for me to simply launch a game and get gaming at 2560x1600 in SLI instantly.

Why would I want a 4th display? for IM windows and desktop icons!
 
Kyle, ever heard of the Intel XEON E5310 CPU for $350? It's a quad core2 chip at 1.6Ghz, and you can buy a dual Socket 771 workstation board for two of those babies for a 8 core system...then overclock all 8 cores to 3Ghz. probably not much more expensive than a E6700 chip anyways
 
Exactly, with SLI enabled you currently only have 1 usable output from 2 cards, it doesn't support multi-monitor yet. I want SLI enabled at all times so I can jump into games easily. Every time I have tried enabling SLI it asks me to reboot, and I do not want to have to reboot to enable SLI, I want it on and there, ready for me to simply launch a game and get gaming at 2560x1600 in SLI instantly.

Why would I want a 4th display? for IM windows and desktop icons!

My experience was that SLI enabled in windows (i.e., not really enabled at all), until I fired up some "Sli-aware" game, was that I'd switch without rebooting. I didn't even have to change something. Like I said, I must have had a buggy driver back when I was doing SLI or something, if you are saying this isn't the way it's supposed to be.. But, I ran 2 displays on an SLI config, and they both showed 2d "windows" and only 1 worked in SLI 3D
 
My experience was that SLI enabled in windows (i.e., not really enabled at all), until I fired up some "Sli-aware" game, was that I'd switch without rebooting. I didn't even have to change something. Like I said, I must have had a buggy driver back when I was doing SLI or something, if you are saying this isn't the way it's supposed to be.. But, I ran 2 displays on an SLI config, and they both showed 2d "windows" and only 1 worked in SLI 3D

You cannot have SLI enabled in the control panel and utilize multi-monitors currently. Only 1 display output will be useable with SLI enabled.
 
I noticed in the article that you mentioned you had a lapped CPU from a precious review. How did you do the CPU lapping? Do you have a link to a related article? Thanks!
 
Back
Top