R.i.p. A7n8x.....?

Nate

Limp Gawd
Joined
Nov 10, 2003
Messages
188
Ok I need some sage advice from you guys.
Current (dead) system is....
A7N8X dlx rev2.0
Mobile +2500 (@2.7ghz on water)
Radeon 9800pro
1gb HyperX PC3500.

I was just surfing the net not doing anything particularly stressful to the computer, and it switched off for no apparent reason. Odd i thought, and went to restart. Pressed the power button, hard disks, fans and cd drives all power up, but thats it. No post, no beep, Nothing,

This is the point where you get a sinking feeling in the pit of your belly. So i had to take it apart and test each bit. Cpu is fine, tested in another computer, 9800 pro likewise, memory i couldn't test, but 2 sticks dieing at the same time seems unlikly. If I turn on with nothing connected to the board but for a CPU, memory and VGA, i get nothing (except the green LED on the board is on), If i remove one of the 3 parts from the board, like the cpu, i get a voice error telling me there is no CPU, or memory or vga, depending on what i remove. Put back all 3 and i get nothng, it doen't even intialise the graphics, the monitor gets no signal at all.

Anyway, having done all i can do to resurrect the board (cleared CMOS too, which did work, because i had disabled voice post in bios origianlly), I am now looking for an equvilant board to my A7N8X dlx. If anybody has more ideas on how to resurrect this board i would be most grateful (i have read the sticky)

Doing some research i have come to the conclusion that the NF7-s rev 2.0 (NOT NF7-S2!) is the board i'm looking for but if therte are any other boards worth considering i would like to hear about them, ideally with the same features as my current dead board. Gotta have sounstorm too, cant do without that.

Thanks for your time.

Nate
 
No, having used all 3 boards.... with 1G of CH5 (I assume) or BH5 you wont get the most out of any ASUS NForce2 model, nor the NF7-S.

The DFI Infinity/LPuB are best equiped to get the max out of your ram. I didnt every mod/trick in the book on my NF7-S's and cant get decent performance out of them with 2x 512M ram. Vmod's, every bios trick in the book, nada. 220-230Mhz fsb is the max I can get...using 1G BH5 or 1G CH5, regardless of loosening timings....

On the DFI I can do 240Mhz 11,2,2,2,2.0 tight as hell flawlessly....and with more seasoned ram (a freinds 1G BH6 well burnt in)...250Mhz 11,2,2,2,2.0.

Do yourself a favor, get an Infinity, load Hellfire's HKA 6/19 bios, life will be wonderful. With water cooling, you're probbly looking at 240Mhz x 11 or 11.5 for an end result.
 
Back
Top