• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Quick question

S

ScratchDrive

Limp Gawd
Joined
Oct 17, 2005
Messages
420
hey guys Im attempting my first Case mod..and I need to strip the paint off the case any tips on what I should use to strip it? thanks
 
If it is the good ol' beige powder coat, you will need to sand it off. If it is just paint, you can use chemical stripper or sand it off. Some say you only have to rought he surface up before painting. However, I prefer to take it down to bare metal and then use primer from there. There are many paint FAQ's around. If you look them up, you might find some other alternatives to what I just posted. Be sure to check them out as you want the best finish possible. No sense going through all that work to paint it if you are going to do it half @ssed.

Good luck with the mod and shoot us some pics when you get done!
 
You must log in or register to reply here.
Back
Top