Question About Rocketfish Case

L

Lt.Col.Dehler

Limp Gawd
Joined
Feb 4, 2008
Messages
164
I think today i am going to BB to pick one of these up. My question is, is it possible to flip the motherboard tray and back panel so everything is upsidedown? because i have heard that some psu's cpu power connector isnt long enough.
 
ok, thanks. lets just hope my 24pin and 4 pin connectors are long enough because i really like this case.
 
you probably will be able to get away with the 24pin connector, but might need a 4 pin extension depending on how you're able to snake the 4 pin connector
 
What kind of PSU do you have? I've got a Corsair VX550 and I had a good 4-5 inches to spare in my Rocketfish.
 
the average oem minitower psu length isn't going to be enough. i bought this GT5636E http://support.gateway.com/s/PC/R/1014825R/1014825Rnv.shtml and the delta 400w cord won't reach in this lifetime. especially with the motherboard's connector all the way up in the right corner. i am thinking now that i may swap my p150 innards c2d, x1950, nec 3520, but i want to keep this labelflash software with this optiarc drive that came with the unit...
 
Performance-PCS has several extension cords for the 24-pin and 4/8-pin ATX power cables. They come pre-sleeved and you get to choose your choice of color sleeving.
 
Corsair HX520 power supply cable reached with no problem on my Gigabyte DS3L with some length to spare. The 4 pin connector is in the top left corner of the board which is the worst case scenario.
 
i just finished putting everything in got it for $50 at BB. love it, its quiet. and everything reached. Cable management isnt that great but oh well. but ill make some changes.
 
You must log in or register to reply here.
Back
Top