• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

q9650 + ud3p

M

merlin87

Gawd
Joined
Aug 18, 2001
Messages
964
I have this board with a q9650 8gb of ozc reaper. I have it stable at 3.65ghz and cant go further. I am pretty new at OC'ing so I dont know what other settings to change beside cpu voltage. I just want to see if I can hit 4.0ghz on air. Any help to try and get a little more out of this guy.

EDIT: I got the system to 3.7ghz by upping the mch to 1.3, but fails occt after 3 hours. I dont remember what my cpu voltage was and im currently at work :eek:

Code: 
Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 9 ]
Fine CPU Clock Ratio............................[ 0 ]
CPU Frequency 3.65GHz...........................[ 406 x 9 ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 406]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2 [Disabled]

******Advanced Clock Control******

CPU Clock Drive.................................[ 800mv ]
PCI Express Clock Drive.........................[ 900mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 0ps ]

******DRAM Performance Control******

Performance Enhance [Standard]
Extreme Memory Profile (XMP)....................[ Disabled ]
(G) MCH Frequency Latch.........................[ Auto ]
System Memory Multipler.........................[ 2.66D ]
Memory Frequency 1066...........................[ 1083 ]
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time................................[ 5 ]
tRCD............................................[ 5 ]
tRP.............................................[ 5 ]
tRAS............................................[ 15 ]


******Motherboard Voltage Control******

Load-Line Calibration [Disabled]
CPU Vcore [ 1.2375 ].......................[ 1.25625 ]
CPU Termination [ 1.20 ]...................[ Normal ]
CPU PLL [ 1.50 ]...........................[ Normal ]
CPU Reference [ 0.760 ]....................[ Normal ]

MCH Core [1.100 ]............................[ Normal ]
MCH Reference [0.760 ].....................[ Normal ]
MCH/DRAM Refernce [0.900 ].................[ Normal ]
ICH I/O [1.500 ]...........................[ Normal ]
ICH Core [1.100 ]..........................[ Normal ]

DRAM Voltage [1.800 ]......................[ 2.200 ]
DRAM Termination [0.900 ]..................[ Normal ]
Channel A Ref [0.900 ].....................[ Normal ]
Channel B Ref [0.900 ].....................[ Normal ]
 
These are my settings for 4.32GHz but they should give you an idea of how to play them

Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 9 ]
Fine CPU Clock Ratio............................[ 0 ]
CPU Frequency 3.65GHz...........................[ 480 x 9 ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 480]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2 [Disabled]

******Advanced Clock Control******

CPU Clock Drive.................................[ 900mv ]
PCI Express Clock Drive.........................[ 900mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 50ps ]

******DRAM Performance Control******

Performance Enhance [Standard]
Extreme Memory Profile (XMP)....................[ Disabled ]
(G) MCH Frequency Latch.........................[ 333 ]
System Memory Multipler.........................[ 2.00B ]
Memory Frequency 1066...........................[ 960 ]
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time................................[ 5 ]
tRCD............................................[ 5 ]
tRP.............................................[ 5 ]
tRAS............................................[ 15 ]


******Motherboard Voltage Control******

Load-Line Calibration [Disabled]
CPU Vcore [ 1.2375 ].......................[ 1.4026 ]
CPU Termination [ 1.20 ]...................[ 1.32v ]
CPU PLL [ 1.50 ]...........................[ 1.57v ]
CPU Reference [ 0.760 ]....................[ .888 ]

MCH Core [1.100 ]............................[ 1.4 ]
MCH Reference [0.760 ].....................[ .928 ]
MCH/DRAM Refernce [0.900 ].................[ Auto ]
ICH I/O [1.500 ]...........................[ Auto ]
ICH Core [1.100 ]..........................[ Auto ]

DRAM Voltage [1.800 ]......................[ 2.100 ]
DRAM Termination [0.900 ]..................[ Auto ]
Channel A Ref [0.900 ].....................[ Auto ]
Channel B Ref [0.900 ].....................[ Auto ]
 
You must log in or register to reply here.
Back
Top