scrawnypaleguy
Limp Gawd
- Joined
- Apr 11, 2006
- Messages
- 489
I'm hooking up my new A8N32-SLI deluxe and I want Q-fan to control the cpu and rear case fans, which the manual says it can do. When I plug in the rear fan to the chassis fan port and the cpu fan to the cpu fan port and run it without Q-fan, both fans run fine at full speed (albeit kinda loud). But when I turn on Q-fan, the cpu fan won't spin up but the chassis fan will.
I thought that maybe my cpu fan (a 1200 rpm 120mm scythe fan) was too weak to begin with and the low voltage supplied to it just wasn't enough to get it started since my chassis fan (a 1500 rpm 120mm Arctic Silver AF12 fan) was working fine, so I switched the two plugs and plugged the chassis fan into the cpu fan and vice versa. However when I did that, the chassis fan didn't spin up but the cpu fan did! What is the problem here?
I thought that maybe my cpu fan (a 1200 rpm 120mm scythe fan) was too weak to begin with and the low voltage supplied to it just wasn't enough to get it started since my chassis fan (a 1500 rpm 120mm Arctic Silver AF12 fan) was working fine, so I switched the two plugs and plugged the chassis fan into the cpu fan and vice versa. However when I did that, the chassis fan didn't spin up but the cpu fan did! What is the problem here?