Pump Relay Switch Kit Wiring?

[Brian@3DGPU]

Guys, Just got a Hydor L30 and one of these pump relay switches (at the bottom).

The wiring diagram shows three wires coming out of a pump cord (I think they are talking about the Eheim) The Hydor only has two and they are not marked or colored.

Any help?

 

[camay123]

Are you sure there is only two wire ? After looking at some review, I saw a three pin connector for the hydor , and even three wire in an article were they hook up an Hydor L30 to a Relay card like yours.

http://www.modthebox.com/review267_1.shtml

 

[Brian@3DGPU]

I found that one...my Hydor has a standard two wire power cable...not like that one

 

[agrikk]

Couldn't you just stick a lead into each but the ground spot?

If the pump flow is backwards or isn't working right, reverse the leads between hot an neutral.

 

[Jima13]

Originally posted by Brian@3DGPU
I found that one...my Hydor has a standard two wire power cable...not like that one

I hooked up a Via Aqua 1300 [also 2 wire] to that relay & it works fine.....the wires were blk/white though which does make it easier