Post your FX-55 Overclocking results!

bradyapba said:
Another question, i see most have either changed the multipler, or the FSB, but not both... can you do both?
yes.
 
So then is anyone doing it? And what are you using? I would love to see someone with a 15 Multi, and also increasing the FSB.....

thanks!
 
I have a set of OCZ Platinum Rev 2 (2x512), which I'm currently running at stock timings, but will loosen them up and bump the FSB up a bit. ;)

I'll update this post when I do, and it is rock solid stable. After I get off from work, that is.
 
i have the same memory, so I will be very interested to see what you get and how you do it, as i am really new to this!

Ace, I see you upped the Mutli to 15, but did you do anything else? Vcore increase? Anything?

Lastly, how do you take those screenshots of cpu-id, etc that are in your post on page two?

ALso what kind of cooling do you have?

Thanks!
 
System specs are as follows:

AMD Athlon FX-55 San Diego 0516 WPMW (of course :p )
DFI SLI-DR with 704-2BTa BIOS
Mushkin XP4400 2.5-4-4-8
BFG 7800GTX OC 500 Core / 1300 Mem
Danger Den TDX Universal Mount Block - 1/2" Barbs
Black Ice Extreme III with 6 Yate Loon Fans - 1/2" Barbs
Danger Den D5 Pump
Dual-5 1/4 Bay Res
WD 1500 SATA I
Hitachi 80GB SATA II
Plextor 716SA
Viewsonic P225FB

CPU = 1.40v
RAM = 2.80v
Chipset = 1.30v
HT = 1.20v

FSB = 200
HT = x5
RAM = 1:1
As you can see, no voltage or FSB changes were made, only the multiplier.

To take the screenshots, do a Google for "The Gimp Project". Make sure to download both the Runtime environment and the program itself.

Once installed, get the benches you want to take a screenshot of on screen and press shift+PrntScreen. Startup The Gimp Editor, click on File then New, choose a resolution that matches your current screen resolution (1024x768, 1280x1024, etc), click OK, then press CTRL+V. Your screenshot should appear.

Make sure to use the Crop Tool (knife blade) to crop the image down so it isn't so big that we have to scroll to the right to see all of it. Save as a JPEG, host on a image site such as www.Photobucket.com, then post a link here. And there you go. :)
 
I have a FX-55 I am trying to OC.

My motherboard, you cant change the multiplier, or i don't know how...

ASUS A8n32-SLi Deluxe

Is it called something diffrent sometimes?

~Joe
 
JBrinley said:
I have a FX-55 I am trying to OC.

My motherboard, you cant change the multiplier, or i don't know how...

ASUS A8n32-SLi Deluxe

Is it called something diffrent sometimes?

~Joe
I haven't worked with this motherboard before so I downloaded the manual so I could assist you.

Click on the Advanced tab and you will find the options to overclock.
 
Well, here are my results.. I was able to clock the (2) FX-55's up to 2.912ghz.. (14x208). I went with 1gb Crucial Ballistix DDR400 on all 3 computers that I built. My Opty 152 (which runs the same stock speed as the FX-55) was only able to hit 2.808ghz (13x216). No biggie.. My little 14 year old daughter won't ever notice the difference..LOL. Paired with a 7800GTX on each computer, I am able to score 4355 on 3dmark06 on all (3) computers.
 
Most i could get out of mine was 2.86.. 14X and 204 on the FSB.... anything past that would get a failure in prime 95 pretty quick... didn't matter how many volts I put on it....so right now im at 14X at 1.45 volts, 2.8....

Not great, i was slighty dissapointed, but any OC is free, and the chip was cheap, and its still faster than the a64 3000 i had.
 
I was able to push things a bit further after tweeking with this for quite awhile.

FX-55-3102-11x282-CPU-14-CP.jpg


I had to up the volts to 1.5 to get it up to 3.1Ghz and drop the Mushkin XP4400 down to DDR333 in order to get it stable. I'll be putting the OCZ Platinum Rev 2's back in after I get through with getting a OCDB entry completed for DFI-Street.
 
I've just got my new FX-55, actually from the BST forum for cheap!

Right now I'm at 14x200 orthos stable and I'm gonna start working on the fsb. I had to dig up some info on the OCZ forums regarding o/c settings with my DFI Ultra-D. I'll post some screens when i get some relevant speeds
 
I hit a wall really fast.

I'm 12 hours orthos stable at 14x200 but as soon as i touch the fsb i get either blue screens or orthos failures.

I'm using a DFI NF4 Ultra-D...same rig in sig except the proc is now fx55 (obviously). I used a guide from the OCZ support fourms for 250fsb memory timings for my kit but its doesn't seem to do much good. I tired 13x205 and failed, its really wierd. I juiced all the voltages and still nothing. I noticed that the northbridge is running pretty hot so i'm goign to try and reseat it with ASC and see if that helps.

But i'm still not sure why i cant get any sort of fsb increase. I'm pretty sure its not the ram since i had it going at 220fsb with my 3200+ at one point, but i guess i should giv'r a go with 1 stick at a time...

If anyone has some advice... I'm getting really frustrated here :mad:
 
CABNE 0524TPMW

3.02Ghz on air(232.4x13) @ 1.350 volts with shitty DDR266 memory :eek:

untitledru6.png
 
Steping up from x13 2.6 to x14 2.8 14.5voltz.
Is 65c safe, computer seems to be stable, my FX 55 hits this temp after about 20 mins using CPU Burn in.
The chip runs hot @ stock speed as well 61c @ full load.
Doesn't seem to be normal judging from these forums, oh I have a cooper heat sink and 15k rpm fan on it as well.
 
Back
Top