PNY Attache' Flash Drive Problem

[MelonSplitter]

Hi. I just bought this flash drive and when I connect to a USB port it tells me a problem occurred during hardware installation. Your new hardware might not work properly. In device manager it has the yellow exclamation point and says ,The device is not configured correctly [Code 1]. I have all the latest updates for windows and for my motherboard, and am using SP2 XP. I know the USB port works because I use it for my printer.

 

[engiNURD]

Try uninstalling the USB Controller, restarting, and reinstalling it.

 

[MelonSplitter]

Thats a no-go

 

[engiNURD]

http://support.microsoft.com/kb/310123

try updating the drivers through windows update. the usb driver is provided in sp1/2 by ms.

there isn't an irq conflict, is there?

 

[MelonSplitter]

I am not sure if there is a IRQ conflict, The USB port powers other devices just fine. It just gives me a problem when I insert the flash drive

 

[roz1281]

i had the same problem on my althlon xp based rig with xp sp2, i fixed it by going into the bios and changing Usb. from USB2.0 to USB1.1 (not the greatest solution ever but it did the trick).

 

[engiNURD]

do other flash drives work?