• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

PcBoarder and Computerpro3 Bench Session (56k = hahahaa)

C

computerpro3

LightningRod
Joined
Mar 29, 2003
Messages
8,702
Well me, Jon, and pcboarder from xtremesystems (Matt), being friends and all decided to get together for an attempt at some serious scores. Our goal is to get into the top 10 3dmark 01 for Single 6800 ultras, to get as close as we can to 23s superpi, to get into top 10 scores for 6600gt (3dmark01), and to all around overclock as high as possible. Matt's crashing at my house tonight so we should get a lot of benching done.

Here's some preliminary pics:

Our Resources :p
Equipment%20goodnetsize.jpg


AMD 3500+ Claw and Dothan 730 - This should be a good superpi battle
motherboards%20good%20netsize.jpg


Mwahahahah feel the power
Powenetsizer.jpg


Here we have 3GB of mushkin, 2GB of BH-5 and 1GB of TCCD, whichever clocks higher and scores best will be used. Also pictured are 1x AGP 6800 Ultra and 2x PCI 6800 ultras. Not shown is 1x AGP 6600GT.
Cards%20and%20Mushkinnetsize.jpg



Dothan being insulated.
Insulation%201%20netsize.jpg


Ready to go with some J-Bolts from Ace hardware....Ya, ghetto, I know..
readynetsizew.jpg


Here we go....
Mounted netsize.jpg
/img]

Only thing I have to add is that the phase change has trouble holding a load, the compressor got damaged during transit to me back from chilly1. So basically it can't hold my 3500 under load at ALL, but with the Dothan, it can for about 10-15min. So we have to be quick when benching, cool it down, then re-bench. I'm sending off the phase change to Chilly1 tomorrow to be repaired.

Be back soon! Right now bios temps reading -33C idle :D
 
You must log in or register to reply here.
Back
Top