pc2100 on ABIT IS7???

Well, you can use PC2100 memory on that (i865PE-based) IS7 motherboard. However, you'll need a 533FSB or an 800FSB processor in order for that memory to run at its rated 133MHz clock speed, according to Intel's 'official' specs for the i865PE chipset. (A 400FSB P4 or Celeron will run that PC2100 at PC1600 speed.)
 
Not exactly. Again, you'll need two identical sticks of memory in order to enable dual-channel support on that IS7. In the case of PC2100, running that dual-channel is a perfect match for a 533FSB P4 processor, such as the famous 2.4b GHz P4. However, PC2100 will result in a slight performance hit when used with an 800FSB CPU.

However, your two current sticks of PC2100 are unequal - one is a 512MB stick, the other is a 256MB stick. In that case, then, you will not get dual-channel support on that IS7 - the PC2100 will run in single-channel mode, which is even more detrimentlal to the overall system performance than using two matched 256MB or two matched 512MB PC2100 sticks with an 800FSB processor; in fact, using PC2100 in single-channel mode with a 2.4c GHz P4 is akin to running a 2.4a GHz P4 on an original i845-based motherboard with regular PC133 SDRAM! If you're going to use a mixture of 512MB and 256MB sticks of memory, and still want to enable dual-channel support, the only way to do so is to use two identical 512MB sticks AND two identical 256MB sticks of memory, bringing the total amount of memory to 1.5GB.
 
Back
Top