pain in the raid

row

n00b
Joined
Oct 8, 2004
Messages
7
attempting to install and set up raid 0 (as storage) with two raptors, 600g - 2.5" - sata 6g

the board is the asus sabertooth z77. i plug the hd's into the sata 6g's and they are not recognized in the bios (it's the latest for this board), they do show up when plugged into the 3g slots though. ok so sata 3g - enable raid in the bios - f10 and then, according to the mb user guide, i should be able to hit <crl> <l> to get into the raid setup, nothing happens, the computer just wants to load the os, which for some reason it can't do, that is until i disconnect the wd's from the sata connections.

any suggestions? thanks in advance folks!
 
thanks for your answer jimj425,

as i mentioned above i plugged the hd's into an s3g - enabled raid in the bios - f10 (saved), once leaving bios i should have then been able to access the raid setup but the keys i punched on the mb had no effect at all, the computer instead attempted to complete loading the os (wind 8.1) but couldn't complete the task, it just started to loop.
 
worked, the hd's were plugged into the asmedia sata ports so i moved them over to the intel ports. thanks for all your help jimh425.

case closed
 
Back
Top