• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Overclock - Too Hot? :p

C

cide_

Limp Gawd
Joined
Sep 3, 2004
Messages
235
So, I was doing some testing and such, Found that I could squeeze 3.4ghz out of this beast with 1.3v to the CPU, and various other tweeks.

Disparity between the pair of Core1/2 and Core 3/4 of about 14C between the two…

My guesses are: Physically, Core1/2 are located on an area of uneven heat paste distribution or defective metal surfaces
Or
-Core1/2 Are receiving more juice than the core 2/3 pair.

These are Die temperatures, right from each Intel sensor. The max on these chips is 100C, but at these temps aren’t I risking electrical runoff?

http://img189.imageshack.us/i/overlock.png/

overlock.png
 
Last edited:
You must log in or register to reply here.
Back
Top