• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

optimize

T

todlerix

2[H]4U
Joined
Apr 25, 2003
Messages
2,244
i have xp2500 barton 333fsb .13micron

pc3200 corsair..

im currently at 184fsbx12.5 2.3ghz
memory is 1:1, im assuming my ram is downclocked (2-3-2-6)

should i lower my multiplier and increase the FSB? how high can my ram go, can i damage my ram (likely or no?)
 
u could possibly take the multiplier down to 12x and the FSB up to 200, which would run your RAM at its rated speed...that won't hurt it....so that would give you 2.4GHz...not bad...100MHz more than ur previous attempt...if that doesn't work, try 12x190 or 195 or something...if you loosen ur timings to, say, 3-4-4-8, oc as high as you can FSB-wise, and then tighten ur timings as much as possible....

good luck!

alex
 
lol no go, i tried 11x200 to utlize my ram, mobo said no thx


also, when i overclock it overclocks my agp and pci ports, is this normal. it isnt a choice im forced to OC those also, in bios and easy tuner, i use easytuner for cpu temps mainly, but i was hoping it would let me OC independantly., does upping the mhz on pci.agp hurt things? any long term damage involved?
 
yes...do not overclock ur PCI and AGP...if you can lock it urself, set AGP to 66MHz and PCI to 33MHz....it won't do 11x200? that's dumb...what's ur motherboard?
 
You must log in or register to reply here.
Back
Top