Opinions welcome

get two gigs of ram and a decent looking case and I'd say you're set for a budget system. :)
 
good point, though if he wants to use one he already has from a current build (probably a 350 or something) he'll probably be fine, since thats not exactly a high power system. for 50-70 bucks for a decent 500 watt, it wouldn't be a bad future proof upgrade, but depending on what you're using now it may or may not be necessary
 
Looks good, I agree with thrawn on the 2gb....

two suggestions/questions:

I might look for a vid card that wouldn't use any system ram. There are some on newegg for a little more. This is just a pet peeve. The fanless is a good idea.

What cooler are you planning on using? Even though the picture is of a retail box, if you read down further, you find that it is OEM packaged.
 
The board you chose has onboard graphics. Though it shares your ram, you won't notice much difference if you won't be gaming, so a seperate vidcard is somewhat useless if its just as good as the onboard.
 
It amazes me why/how they shove 512MBs of memory into crappy, useless little GPUs. Don't ask me what that is ever going to do when 320MB cards such as the 8800 GTS wipe the floor with these migit, budget GPUs.
 

OK, so we built this system last night and had a couple of problems. System turns on but the monitor does not come on and the system does not turn off via the power button. We took the power supply out of my old computer (400watt)and put it in this machine but it only has 20pins not the 24 pin that the board requires. Am I safe to assume that the reason the monitor didn't turn on was lack of the correct power supply i.e watts and connection?? We are running two ide drives and one sata drive but we have eliminated the vid card because it already has on board. Thanks in advance for the help.....
 
disconnect all the drives, just to see if you can get it to POST (get into the BIOS). If not, re-seat the cpu. the 20pin psu should still power up the system just fine.
 
Back
Top