old biostar bios flash

theboohi

n00b
Joined
Feb 26, 2003
Messages
35
hey,

im a n00b to bios flashing, but i have an old computer that im fooling around with. its running win95 with a pentium 166. i used a utility to find what the mobo was, its a biostar MB-8500TVX, using amibios. since its old, it wont recognize the 30 gig hd i want to put into it to store files and such. i found an updated bios, and the instructions said to take the bios file, put it onto a floppy, start the computer while holding ctrl and home down, release after 3 seconds, it should beep and reboot, and thats it. i tried it a few times, but i get no beep and reboot or anything. am i doing something wrong? is there another way to do what i want to?

any help is very much appreciated :)
 
Do it the old way, get a bootdisk , get amiflash and the latest bios for your board, create the bootdisk, unzip amiflash and bios to another empty disk, boot, replace disks, then type a:\amiflash bios.bin

Simple as that :D

OldMX
 
Back
Top