OCing advice

G

Gutlass Cutlass

Limp Gawd
Joined
Apr 18, 2005
Messages
166
I got my FSB up tp 250 but my ram is only running at 158mhz. Should I tighting my ram timings? Would like to hear what you guys think my next move should be.

oc.jpg
[/IMG]
 
Gutlass Cutlass said:
I got my FSB up tp 250 but my ram is only running at 158mhz. Should I tighting my ram timings? Would like to hear what you guys think my next move should be.

oc.jpg
[/IMG]
Click to expand...
WOW that is a small screenshot.
 
I have 2 1gb kits of G-Skill HZ ddr500 Sry for the small screenshot, I"m having problems blowin it up. I got the Cpu to 2.5ghz. The FSB is at 250mhz and the mulitplier is at 10.
I have not touch'd the CPU Voltage or the Ram timings or dividers. What you think my next move should be?
 
Well, without being able to see because of that insanely small screenshot, there's not much I can really say. I pretty much know for a fact though that your RAM should be able to hit some decent speeds at stock timings. You may be able to expect 270-280 maybe. That RAM has UCCC chips; they can't deal with timings tighter than 3-3-3-8 or so and love low voltage. Best settings tend to be 3-4-4-8 or 3-4-3-8 and voltages around 2.6-2.8. Get us a better screenie!
 
um, if you are running your fsb @ 250mhz, your ddr 500 ram runs stock @ 250mhz (ddr500), so you don't need to use a ram divider at that speed.
 
I have the same RAM mine tops out at 275FSB @ 3-4-4-8.

Like has already been stated the RAM does not like higher voltages. COuld not get a single clock out of them increasing the voltage.
 
You must log in or register to reply here.
Back
Top