• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Nzxt phantom fan controller

J

Jbort1984

[H]ard|Gawd
Joined
May 28, 2009
Messages
1,356
Odd question for you guys I want to make a switch to turn my fan controller on and off as i have it hooked to 4 white led fans and the 2 200mm blue led fans in the toip of my case and its kinda bright at night. So any ideas besides unplugging the molex connector completely from the controller any way i could add a simple switch in line and if so on what color wire would i need to splice into.
 
You would need to splice into the power wire(s) of the molex: red, yellow or both.
 
As stated above, it should be easy enough... Just put a switch in-line with the power input of the fan controller. I'm assuming it simply takes 12v in. So, put a switch on the yellow line, rated for at least 2x the amperage of your fans... Look for a switch rated for 3A or higher.
 
You must log in or register to reply here.
Back
Top