northbridge question & thermal grease question

Joined
Aug 7, 2003
Messages
807
i just ordered the nf7-s as an upgrade from my shuttle mn31n to house my athlon xp 2500+, and i realized i don't have any high quality thermal grease. i do not overclock, but i do have some grease that came with my zalman northbridge cooler (found here). it's the thermal grease, not the adhesive. would this be fine? or should i not risk it and order some arctic silver 5?

i have that northbridge cooler on my old motherboard, but i used the thermal adhesives seen in the link above to attach it. you put one kind on the heatsink, one kind on the northbridge, and they bond. i'm wondering how i can unattach it from the mn31n to use on my new motherboard. the manual says it cannot be removed, but do i just have to figure out a way to warm it up? tips are appreciated.
 
also, why do they call it grease* becuase i have artic silver and its clearly not grease its paste.
 
epoxy doesent loosen when it gets hot i believe, atleast not at the temperatures the chip can withstand, you can try using a razorblade and sawing / gently prying between the chip and heatsink otherwise its probably not coming off safely.

someone mentioned acetone to get off the epoxy, but im not sure how easy that would be to use in your case, worth a try though if you want

arctic ceramique is a paste, but arctic silver and its immitations are usually sorta greasy moreso if they arent mixed well
 
Back
Top