Northbridge cooler?

SerialThriller

Limp Gawd
Joined
Jul 15, 2004
Messages
359
1. can anyone tell me the use for a northbridge cooler?

2. and a little definition of it?

3. Also, why would someone need one?
 
SerialThriller said:
1. can anyone tell me the use for a northbridge cooler?

2. and a little definition of it?

3. Also, why would someone need one?

1. To disipate heat

2. Ummm a hs some times accomponied by a fan that fits on the northbridge

3. To disipate heat as a result of northbridge usage needed more for OCing
 
1. i dont suppose there is a southbridge cooler?

2. and btw just so i got things right, the north bridge contains the CPU, RAM, and the ports to connect peripherals while the south bridge is like the AGP port, PCI ports, and places to connect stuff from the case and some USB stuff, etc?

3. is the spot on my mobo that is like a bunch of spikes right below the CPU a place for a hs? or is it a hs? or maybe a spot for a northbridge cooler?
 
1. Most southbridges dont have coolers.

2. thats pretty much the case except the southbridge controls most peripheral ports
with the exception of onboard video which is either a seperate controller or integrated into the northbridge

3. the spikes are part of the heatsink. the actual northbridge is below that.

A northbridge cooler is the same thing as a heatsink.
Northbridge coolers come one of two ways usually Active and Passive
Passive is like yours a large heatsink with no fan
Active implies a fan
 
ah i get...except...the northbridge is the actual north part of the mobo correct? and the spikey thing below my CPU is a passive northbridge heatsink?
 
Northbridge basically communicates your CPU to the other fast data rate components, e.g. AGP slot and Ram, and then the Southbridge. (although Athlon64's now communicate directly to the Ram, no need for the northbridge's ram controller.)

Southbridge works with the slower peripheral components, e.g. hard drives, cd drives, usb and firewire. And PCi in some cases.

Yes, the heatsink is the grille-type thing with fins. It sits on top and spreads the heat from the northbridge out for more air contact.
 
and the northbridge is really a CPU component kinda?, in that its main job is to act as a bus between the CPU and other components?
 
kinda confusing...the article says that a north or southbridge is not a bus. So, is it right to say that the chipset (which is the northbridge and southbridge?) is more like a station that allocates where the information should go rather than acting (as a bus does) and actually transfer the data?

btw, tks, for the replies :D
 
SerialThriller said:
kinda confusing...the article says that a north or southbridge is not a bus. So, is it right to say that the chipset (which is the northbridge and southbridge?) is more like a station that allocates where the information should go rather than acting (as a bus does) and actually transfer the data?

btw, tks, for the replies :D

The chipset is the main chips used on a motherboard, normally just the northbridge and southbridge. (some server motherboards use more chips than this as part of a chipset, eg ServerWorks chipsets often use 3 or more chips)

All the various chips in a comptuer are connected by busses. (there are some busses internal to some chips too, but we will not get into that)

So in general a bus is a connection between chips, or more correctly between devices in the computer.

The CPU connects to the Northbridge via the FSB (front side bus) the video card connects to the Northbridge via the AGP bus. The Southbride connects to the Northbridge via a bus (usually one propriatary to the chipset vendor, but not always) PCI cards connect to the Southbridge via the PCI bus.

So the Chipset is more of a switching station between busses. But the data does go thougth the chips, as they are the only connection between busses.

==>Lazn
 
I think i got it. For example, the only way a graphics card could connect to the CPU and be powered is by using the AGP bus to connect to the Northbridge and then using the FSB to connect to the CPU?
 
SerialThriller said:
I think i got it. For example, the only way a graphics card could connect to the CPU and be powered is by using the AGP bus to connect to the Northbridge and then using the FSB to connect to the CPU?

That's correct.
 
Back
Top