NF7-S new bios and CPU Temps.

Grahxen

Gawd
Joined
Mar 6, 2003
Messages
580
Im sure this has been posted but since the search is broken i cant find it. I havent flashed my NF7-S 2.0 board in quite a few months until last night. I flashed it to the newest version and my cpu on board diode is reading 10 degrees higher. I also have an external diode i use with my thermal probe and of course that reads about 9 degrees lower, almost exactly what the old temp read before the bios flash. I remember this problem in the beginning when the boards came out with them reading about 10degrees higher then they should, and then they fixed that problem in one of the bios updates. I guess here we go again?

Im running an xp 2500 @ 2.2Ghz on water, my normal idle temps are about 30c with the old bios, and what my thermal probe reads now. With the new bios, Im at 39-40c idle.

Anyone else have this problem?

Thanks
 
I have had this problem before! I am using my setup below and am on stock cooling. I am not OC'ed at all and my temperatures used to be at 30-35 cpu and mobo temps at idle... now they are in the high 40's and i havent done a thing except for update the bios on my nf7-s! I don't know what to do either...

-warsaw
 
Originally posted by Iceman_IX
Was your old BIOS 1.6 or before? Those temps were ~10C too low.

That definatly isnt correct. I tried 2 seperate thermal probes from 2 different sources under chip and under heatsink, and none of them match the new temp reported by the new bios.

In bios #14 this was one of their fixes.

Fixed CPU temperature too high issue.

Many people complaining that had any previous bios said their CPU temps were reading way higher then they should. So in 14 they addressed it and fixed it. Now with the new bios they reversed it 10 degrees again. Doesnt make any sense to me.

Even if i didnt use 0 probes at all, no way my cpu idles at 40c with my water cooling rig. Besides the fact that 2 different diodes read 8-10 degrees cooler then the new reported temps.
 
I was poking around their site yesterday, and there is a beta bios that is supposed to fix the temperature problems apparently.
 
It is correct, I've been around the NF7 for a while. The temps were originally too high, then too low, then they fixed it around 17. Bios 18 and later should be accurate. There was a guy with watercooling who had too high temps...he fixed it by fooling around with his setup and trying some cold boots, eventually worked itself out. Temp diodes can be inaccurate, based on where you put them. Granted, NF7 users have been known to (rarely) get weird coldboot temps. I'd suggest fixing up your watercooling a bit, and idle in BIOS.
 
Originally posted by Iceman_IX
It is correct, I've been around the NF7 for a while. The temps were originally too high, then too low, then they fixed it around 17. Bios 18 and later should be accurate. There was a guy with watercooling who had too high temps...he fixed it by fooling around with his setup and trying some cold boots, eventually worked itself out. Temp diodes can be inaccurate, based on where you put them. Granted, NF7 users have been known to (rarely) get weird coldboot temps. I'd suggest fixing up your watercooling a bit, and idle in BIOS.

I got one of those wierd cold boottemps. Usually my WC rig runs 36idle (I'mon a nf7-s as wel). Oneday I booted up and all day my temps were 10C lower then usual ( running at around 25C idle). I wish abit would show the correct temps :( reall like to know =\
 
Originally posted by Grahxen
That definatly isnt correct. I tried 2 seperate thermal probes from 2 different sources under chip and under heatsink, and none of them match the new temp reported by the new bios.

In bios #14 this was one of their fixes.

Fixed CPU temperature too high issue.

Many people complaining that had any previous bios said their CPU temps were reading way higher then they should. So in 14 they addressed it and fixed it. Now with the new bios they reversed it 10 degrees again. Doesnt make any sense to me.

Even if i didnt use 0 probes at all, no way my cpu idles at 40c with my water cooling rig. Besides the fact that 2 different diodes read 8-10 degrees cooler then the new reported temps.

You tried going back to the bios14 and see if that helps?
 
Yes, ive went back to the old bios. Instant 10 degree difference. Absolutly nothing wrong with my water cooling setup, and i already said i have 2 different diodes from 2 differnt units reading temps. Under the cpu, and under heat sink. Both of them are 8-10 cooler then the new bios.

Theres reports again on abits site that the new temps are wrong again.

it isnt me.
 
Yeah, I am having the same exact problem. My temps are quite a bit over what they were before I flashed my BIOS. About 8*C. There is no way my case temp is 35*C when it was 25*C prior to the flash.
 
NF7-S 2.0?

Everyone that flashes to the newest bios of this revision will have higher temps. But it wasnt the latest bios that changed the temps, it was 1 or 2 previous ones. So if you had one of those already then the new bios made no difference.
 
Back
Top