New Q6600 build. Help please

Astroman

Gawd
Joined
Jun 14, 2003
Messages
684
Okay I'm going to drop the hammer on a new q6600, upgrading from the A64 3400+.

I've spent hours reading the forum and reviews etc.. but can't seem to figure out what motherboard to use. The P5k seems good, as do the other P35 boards, but it seems they all require DDR3?

I think I want to use DDR2. 2 Gigs is only 80 bucks and I can't wait for DDR3 to get cheaper, I need to build NOW.

So, what do those of you who follow regularly suggest? I'm not going to do SLI, but will probably pick up an 8800. I'm considering 2 of the 2gb sets of OCZ HERE

So that's 4 gigs for about $160...

Any other advice? Thinking Antec P180 as well. Not going with an X-Fi again after the BS I've gone through with it in BF2. Creative sucks.

Oh sorry to crap on my own thread lol.

So.. what do you think?
 
Actually only a few of them require DDR3, and some even take both, like the GA-P35C-DS3R. If you want a bit cheaper, you could go with the DDR2 version, GA-P35-DS3R. The Abit IP35 is also a popular choice, with whichever trim comes with the features you need.

What size monitor do you have?

The quads are great, but are only truly needed for video editing and supcom... or some other apps that take advantage of quadcore cpus. A lot of games are still trying to make use of dual core, lol.

Personally, I'd go with a P35 board now, and a fast dual core. Then within a year or so, pickup a yorkfield (45nm quadcore). I'm waiting for the yorkfields mainly because they'll run cooler, use less voltage, which should make them great overclockers... an added bonus is that they're native quadcores, which is why I think they'll be better overclockers. Its still hard getting 4 cores stable at an OC'd setting, but I think the lower stock voltage will help by giving more headroom for heat.
 
I went with the P5B-Plus and I will soon get my Q6600. I have also went with Corsair DDR675 and I'm happy with the board so far. I have had it 3months and have a E4300(1.8) sitting at 3.00 (334fsb). I will have the Q6600 running at 3.0 and the timings for this ran are 4-4-4-12. If I had to buy a board now, I have been looking at Msi :
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130098
 
Eh. MSI isn't bad, but I'd get a Gigabyte or Abit board before one of theirs. P35-DS3R or IP35.

Love my P180B. If you want it quiet with good airflow grab 4 Yate Loon 120mms to replace the TriCools it comes with. Included fans are either uselessly wimpy on low or loud on high. Yate Loons (medium speed variety) move about the same amount of air as they do on high while making very little noise, comparatively. $4-5 each.
 
Back
Top