New Build wont post..

jayx9

Limp Gawd
2FA
Joined
Aug 1, 2005
Messages
309
Need help as to why the computer wont post. When I hit the power switch everything turns on(fans, fan from vid card and typhoon fan on the cpu(but it takes a few seconds for this to turn on). I get a no signal from my monitor, tried hooking my dvi connection to both sides of the 7900, and the tried connectiong to the monitor to the motherboard vga... I still dont see anything. None of the hard drives or cd drives are connected. There is no speaker on the p180 so I cant hear any beeps if there is any...Also there is no light on the motherboard itself to assure me that its on...But the cpu fan goes on so it has to be connected...

Any help would be appreciated..

Antec P180 case
Gigabyte GA-965G-DS3
intel e6300
Corsair xms2 2gb kit
big typhoon cooler
7900gs
 
Make sure the HSF is properly installed. Also, what PSU are you using?
 
I own an antec P180 and i get beeps. I think theres a small one ifront of the upper drive cage. I havnt really looked so i onno, but i do get post beeps.

anywho, seems to me like you need to start testing components. Its mostlikly video card, but, heres the order in which id do it if i was in your shoes:

test monitor first lol.
test 7900GT next, this could be difficult as your gonna have to hunt down another pcie video card. depends on your situation.
test RAM.
test PSU.
test CPU
if none of those yeilds a problem is time to RMA the board.
 
Back
Top