New Build - Please Critique

Nybbles

[H]ard|Gawd
Joined
Jun 17, 2002
Messages
1,234
Looking to replace my 3 yr old Ath64. Not planning to overclock, nor do I need SLI. Will be doing general computing with occasional moderate gaming. In a couple months, will add another 2 GB RAM and probably two more HD's in a RAID1 and use this as a VMWare server along with my normal computing.

Price w/ tax, shipped to my door is $1186.88 through NewEgg. What do you guys think?

Antec PERFORMANCE TX TX1050B Black Case w/ 500W Power Supply
ABIT IP35 Pro Motherboard
BFG Tech GeForce 7950GT 256MB GDDR3 PCI Express x16 Video Card
Intel Core 2 Quad Q6600
Crucial Ballistix 2GB (2 x 1GB) DDR2 800 (PC2 6400) Dual Channel Kit
Maxtor 500GB 7200 RPM SATA 3.0Gb/s Hard Drive
LITE-ON 20X DVD±R DVD Burner with LightScribe Black SATA
 
I'd personally think you'd want a bigger PSU. I'd find the case by itself (or a similar one) and purchase a PSU by itself.

Are you using the default cooling for the CPU? You might want to think about getting a good heatsink.
 
The PSU that comes with that case is listed as the SP500, which is a SmartPower 500W, supplied by CWT, as were a lot of other Antec PSU models. These models were inadequately cooled, which led to premature failures in high heat environments.

Is there something particular about that case that you like? If so, I'd look for the case without the PSU. If not, find a different case, and pickup one of the PSUs RoBo suggested.

An aftermarket cooler is only needed if OC'ing. BTW, these Core2 chips OC very easily.
 
ok guys. I figured that 500w would be sufficient, even with the extra drives I'm planning on. However, if enginurd is correct and this PSU is not as good as it should be, I'll plan on a seperate case and PSU.

As for the case, I really do like the design. It's almost identical to the Antec I currently have and have been using for years. It's a sturdy (and heavy), no-frills case that's easy to work inside. And I've been unable to find it without the power supply.

What do you guys think of these? Or suggest one thats around the same price range.

Antec Solo
LIAN LI PC-7B plus II

Antec True Power Trio TP3-650 ATX12V 650W
FSP Group FX700-GLN ATX12V V2.2/EPS12V 700W Power Supply
 
ok guys, I bit...

Swapped out the Antec case for a Lian-Li and the Corsair 620 (yes, the six-twenty). I went over my budget, but damn, this new build should last me several years.

My parts should be here before Friday! :D Thanks for the advice!
 
ok guys, I bit...

Swapped out the Antec case for a Lian-Li and the Corsair 620 (yes, the six-twenty). I went over my budget, but damn, this new build should last me several years.

My parts should be here before Friday! :D Thanks for the advice!

Good choices.

Yah, Antec used to use CWT (maybe they still do for other models) for some of the TruePower and SmartPower PSU lines. Some of those models uses fuhjyyu capacitors. Those infamous capacitors are known to fail in high heat conditions, so all you have to do is keep them cool. However, with Antec's smartfans trying to stay off, to keep things quiet, it gets too hot for those particular caps and they start to cause failures. XClio also uses CWT for their Goodpower, but their cooling is sufficient to prevent failures in most cases.
 
Back
Top