• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

NEOPower Cold Boot Problem

F

fuzzy34

Am I Really Still [H]ere?
Joined
Jul 11, 2004
Messages
958
EP-MGF6100-M and Antec NEOPower 430W....are they incompatible?

Just built another machine, specs are as follows:

EP-MGF6100-M (AM2)
Athlon X2 4200+
BFG 7900GT
2x1GB Corsair XMS2
80GB and 250 GB Western Digital Hard Drives
Lite-on DVD burner
2x Silverstone 120mm fans

The system will not power up when all are connected. I have the 2 hd's on a rail, the video card on a rail, and the cd drive w/ fans on another rail. It will power up when the fans and cd drives are not connected after a couple of tries, but after I turn it off, it has trouble turning back on again. I also unplugged everything except the 24pin and the 4pin from the motherboard only to run into the same booting problem. So I am thinking they are either incompatible (the mobo and psu) or the psu just might be bad....

All help is appreciated :(
 
You must log in or register to reply here.
Back
Top