Need HELP on overclock very quick please.

[murilo305]

I am planning on overclocking my pc It is

Processor:Intel® Core™2 Duo Processor E6600

Motherboard:Quad-Core Supports) Asus P5N32-E nForce 680i SLI Chipset LGA775 FSB1333 DDR2 Mainboard

Powersuply:500 watt.

For the porcessor would it be better to overclock a AMD Athlon™64 X2 6000+ Dual-Core CPU w/ HyperTransport Technology or the Intel® Core™2 Duo Processor E6600.

I heard its like a chance to overclock I really dont no but i would appriciate your help.

 

[magoo]

Your motherboard, the P5N32-E SLI only supports Intel socket 775 CPUs.
You cant put an AMD CPU on that board.
If your question is, "is it easy to overclock an e6600 Core2Duo with that board" the answer is yes.

Read this:www.nvidia.com/docs/CP/45121/nforce_680i_sli_overclocking.pdf

 

[murilo305]

k thx alot!!!

 

[rsgunter]

Don't start overclocking until you understand the socket types of processors.

Be careful, and best of luck.

 

[ginnz]

the e6600 clocks way better than the amd. the amd is almost at its limis stock....

i have an asus board, the plain p5b-plus, and the e6600, i have had it orthos stable at 3.8 ghz with 1.575 core volts.....

now i dont suggest you try this at first, read up on it, and understand what you are doing.

and remember, Ocing is dependant on more than just a cpu, you need good ram, psu, mb also.

read up on it first, then come back, id be glad to help you get a good oc. if you air cooling, dont get your hopes too high, say 3- 3.4 ghz.

 

[pdawg17]

the e6600 clocks way better than the amd. the amd is almost at its limis stock....

i have an asus board, the plain p5b-plus, and the e6600, i have had it orthos stable at 3.8 ghz with 1.575 core volts.....

now i dont suggest you try this at first, read up on it, and understand what you are doing.

and remember, Ocing is dependant on more than just a cpu, you need good ram, psu, mb also.

read up on it first, then come back, id be glad to help you get a good oc. if you air cooling, dont get your hopes too high, say 3- 3.4 ghz.

You are using watercooling then I assume?

 

[magoo]

the e6600 clocks way better than the amd. the amd is almost at its limis stock....

i have an asus board, the plain p5b-plus, and the e6600, i have had it orthos stable at 3.8 ghz with 1.575 core volts.....

now i dont suggest you try this at first, read up on it, and understand what you are doing.

and remember, Ocing is dependant on more than just a cpu, you need good ram, psu, mb also.

read up on it first, then come back, id be glad to help you get a good oc. if you air cooling, dont get your hopes too high, say 3- 3.4 ghz.

1.575 volts is getting very close to the edge with that CPU. I do not recommend going over 1.5 unless you have good cooling and money(plus CPUs) to burn.