Need help deciding a a64 mobo

Brando457

[H]ard|Gawd
Joined
Aug 11, 2003
Messages
1,232
okay I've narrowed it down to 2 different motherboards I'm looking at. I'm having trouble deciding between them :(. I'd like anyone's input on why one is better than the other, or any problems with a specfic one. If there is any motherboard you see listed, and would like to suggest please feel free to. These are just the ones I've found after searching reviews and such.

The motherboards are:

ProAbit Kv8 Pro


DFI Lan Party Nforce 3 250gb
 
I saw the DFI board on pricewatch listed at newegg but now newegg is down :mad: I was sooo gonna order it today to.
 
Yeah teh DFI does look like a sweet freaking board, but so does the asus :( so thats where im kind of beat. I'm using nforce right now and love it, but Ive been hearing awesome things abotu the via new chipset.
 
agp/pci locks can affect ur oc, if u raise the fsb without agp/pci locks, the agp and pci speed will go up and this is not a good thing, it will limit ur oc by ALOT so get the dfi lan party if u want to oc
 
DFI lanparty it is, I hope the xp 3000+ I get is unlocked and will OC nicely :). Is the stock cooler sufficient with a64s or should i be looking at a aftermarket one?
 
it should be good enough.... i have thermaltake k8silent boost and my team at idle is 29c
 
i thought you were going for the 64bit setup? no? the lanparty board for the 754 socket is majorly sweet as well.
 
aZn_plyR said:
agp/pci locks can affect ur oc, if u raise the fsb without agp/pci locks, the agp and pci speed will go up and this is not a good thing, it will limit ur oc by ALOT so get the dfi lan party if u want to oc

Remember that agp/pci lock isn't all there is to it especially with the nforce chipset. In the case of the MSI Neos, the SATA ports start "overclocking" as well, i.e. they aren't locked (they aren't on the PCI bus) thus if you go too high the SATA channels quit working. The NON NForce chipsets hang the other peripherals off the PCI bus and since it is locked, these other peripherals are locked too. Of course they are also bandwidth limited since they all share the PCI available bandwidth.
 
everywhere i freaking go that DFI UT NF3 mobo is sold out...i hope the computer expo at pomona has it with a 3200+...im gonna snatch that thing up asap
 
SlimShady said:
i thought you were going for the 64bit setup? no? the lanparty board for the 754 socket is majorly sweet as well.

I am going for the DFI 64bit lanparty.... nforce3
 
Good choice on MB. A 3200+ or a 3400+ should be suffient...
 
3200+ is about 200$ or so, the 3000+ is only 174 and I figure I can get the 3000+ to 2.5 ghz no problem. Unless the 3200+ can do about 2.8ghz
 
actually they all do around the same overclocked, its just the cache size
 
Got mine from gameve about a week ago. It's gonna be kind of funny with all the overclockers running around with yellow pci sockets etc. With the DFI I was able to get my clawhammer 1MB to 2.45Ghz on STOCK 1.5v. and it can no doubt go much higher (the mobo that is)
 
Back
Top