So I am building a new a PC, and I need some advice on my cooling decision as of far.
The setup so far is as follows:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard - Retail
Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 - Retail
OCZ XMP Ready Series 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Low Voltage Desktop Memory Model OCZ3X1600LV6GK - Retail x 2
BFG Tech BFGEGTX2951792E GeForce GTX 295 1792MB 896 (448 x 2)-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video ... - Retail x 2
Fujitsu MBA3300 MBA3147RC 147GB 15000 RPM Serial Attached SCSI (SAS) 3.5" Internal Hard Drive - OEM x 2 (RAID 0)
Seagate Barracuda ES.2 ST3750330NS 750GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive - OEM (for storing backup image of SAS drives)
Seagate Barracuda 7200.10 ST3500630AS 500GB 7200 RPM SATA 3.0Gb/s 3.5" Hard Drive - OEM x 5 (RAID 6)
areca ARC-1231ML-2G PCI Express SATA II Controller Card - Retail
areca ARC-6120 Full Height Battery Backup Unit - Retail
MASSCOOL SYTRIN Kuformula SHF1 Ultra HDD Cooler – BK - Retail
Noctua NH-U12P SE1366 120mm SSO CPU Cooler - Retail
SILVERSTONE TJ07-BW Black Aluminum ATX Full Tower Computer Case - Retail
Rexus NMB-MAT (Panaflo) 120mm Case Fan - Retail x 4
Rexus NMB-MAT (Panaflo) 92mm Case Fan - Retail x2
Would the case and new fans be adequate cooling for the parts above.
The setup so far is as follows:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard - Retail
Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 - Retail
OCZ XMP Ready Series 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Low Voltage Desktop Memory Model OCZ3X1600LV6GK - Retail x 2
BFG Tech BFGEGTX2951792E GeForce GTX 295 1792MB 896 (448 x 2)-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video ... - Retail x 2
Fujitsu MBA3300 MBA3147RC 147GB 15000 RPM Serial Attached SCSI (SAS) 3.5" Internal Hard Drive - OEM x 2 (RAID 0)
Seagate Barracuda ES.2 ST3750330NS 750GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive - OEM (for storing backup image of SAS drives)
Seagate Barracuda 7200.10 ST3500630AS 500GB 7200 RPM SATA 3.0Gb/s 3.5" Hard Drive - OEM x 5 (RAID 6)
areca ARC-1231ML-2G PCI Express SATA II Controller Card - Retail
areca ARC-6120 Full Height Battery Backup Unit - Retail
MASSCOOL SYTRIN Kuformula SHF1 Ultra HDD Cooler – BK - Retail
Noctua NH-U12P SE1366 120mm SSO CPU Cooler - Retail
SILVERSTONE TJ07-BW Black Aluminum ATX Full Tower Computer Case - Retail
Rexus NMB-MAT (Panaflo) 120mm Case Fan - Retail x 4
Rexus NMB-MAT (Panaflo) 92mm Case Fan - Retail x2
Would the case and new fans be adequate cooling for the parts above.