• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Need A How To: Rebuild RAID array

M

MrMitch

Spinning Drives Rule!
2FA
Joined
Dec 13, 2004
Messages
2,638
Howdy folks,

My P5B died on me. i got a new one arriving tomorrow. Now i had 2 x 74 gig raptors in raid 0 on SATA 5 and 6.

Now do i just hook the 2 drives up and build an array using cntl+I ?

Do they have to be "rebuilt" to ensure the new board boots to them proporley.


Any help is appreciated.
 
If the bios version is correct i would try hooking them up and seeing if they work. Making a new array would be a no no. Your array should show up and shouldn't need to be rebuilt it should just work. Worst case it'd need to be rebuilt but using on board controllers is tricky so you might have a bit of a challenge on your hands.
 
Alright, so obviously make sure bios on the new matches the old. 7-11 for me. Set the controller to Raid mode and hopefully it'll show up.

here's hoping.

I really dont want to reinstall windows.
 
You must log in or register to reply here.
Back
Top