Need a 4GB Mobo

Hiyruu

2[H]4U
Joined
Jul 28, 2001
Messages
3,611
I need a 4GB mobo, but I need one that still supports high-performance ram, and other components.

I noticed that all the 4GB mobos are geared towards servers, and therefore they cut corners e.g (only supporting p3200 ram, or limiting the CPU speed or something else.

I just want a 4GB board that is as fast as any 2GB board.
 
Since the only people really using 4gig + RAM in their systems are servers and high end workstations your probably not going to find much in the way of enthusiast type boards and hardware in that market segment.
 
SK8V and SK8N are PC3200 Registered Ram ECC Ready. 8 GB of PC2700 and MSI K8T Neo 2 Far 940 Socked SUpports 8GB.
 
Originally posted by Wrench00
SK8V and SK8N are PC3200 Registered Ram ECC Ready. 8 GB of PC2700 and MSI K8T Neo 2 Far 940 Socked SUpports 8GB.

There you go, those should give you some tweakability also.
 
The Abit IC-7 supports 4GB of memory. It has 4 slots, each supporting 1GB each.
 
Originally posted by t0x1k
Don't the P4P boards support upto 4GB of ram? 1GB per channel?

Yes they support up to 4GB of RAM but there are only two channels so 2GB per channel if you use 1GB DIMM's.

I'm not for sure why anyone didn't say a Pentium 4 board but i guess they know something i dont lol.
 
for intel desktop boards, only the 865 and 875 chipsets support 4GB of ram.

problem is getting 1GB dimms

those things cost a fortune
 
Originally posted by burningrave101
I'm not for sure why anyone didn't say a Pentium 4 board but i guess they know something i dont lol.
Yeah that's what I was thinking as soon as I saw this, but no one said it so I thought I must be thinking of something else, and I was too lazy to look it up.
 
Originally posted by snowwie
for intel desktop boards, only the 865 and 875 chipsets support 4GB of ram.

problem is getting 1GB dimms

those things cost a fortune

Some boards like my Gigabyte GA-8KNXP have 6 DIMM slots. Of course you can still only have 8 memory banks.
 
He needs the 4GB of RAM for the new AOL TopSpeed! Hee hee.

Actually, if you've got tons of money burning a hole in your pocket, go for it. It's going to cost around $1500 to get all that memory.
 
Seriously though, you would have to be running a server or something to need 4GB of RAM. 2GB is all you need for heavy encodeing and stuff like that.
 
There has to be a reasonable stopping point somewhere, right?

And yes, the ABIT IC7 boards do support 4gigs. But is there anyone who has actually done this?
 
Man you can install WindowsXP and a few programs in this guy's ram. Imagine how fast his computer would be.
 
Originally posted by darktiger
Man you can install WindowsXP and a few programs in this guy's ram. Imagine how fast his computer would be.

Yeah until he turned off his computer or there was a fluctuation of power and his RAM got wiped :p
 
4GB would be sweet...

id setup a ram disk and put the swap file on it.

that'd be wicked fast..
 
You would only have around 3.5 Gigs of useable ram.
The bios reserves around 1/2 gig for pci cards etc.

Luck.......:D
 
Originally posted by Tigerbiten
You would only have around 3.5 Gigs of useable ram.
The bios reserves around 1/2 gig for pci cards etc.

Luck.......:D

thats only when you have that amount of ram?

that doesnt make sense.. explain! :)
 
Ok
From a previos post.
Why is my 4GB of memory reported as about 3.5GB by the system?

Despite technically supporting up to 4GB off memory, the maximum DDR memory support is actually about 3.5GB rather than 4GB. This limitation is caused by the current PC architecture in which the missing 0.5GB of memory addresses are reserved for PCI I/O space, AGP aperture mapping space and other onboard device I/O space. Thus although the chipset datasheet may claim memory support for up to 4GB, the system actually only offers about 3.5GB with four 1GB DDR DIMMs installed. Do not expect a BIOS fix and do not expect it to be different on any other motherboard - 32 bit processors only support 4GB of address space! Reducing your AGP aperture to 32MB may help matters by freeing up some AGP aperture mapping space (assuming you currently have a larger aperture set).

Hope this helps

Luck.............:D
 
The i875P based Asus P4C800-E Deluxe supports 4GB dual channel memory and will give you a nice set of overclocking features and Gigabit lan.

Or if you prefer get the Abit equivilent.
 
Originally posted by Tigerbiten
Ok
From a previos post.


Despite technically supporting up to 4GB off memory, the maximum DDR memory support is actually about 3.5GB rather than 4GB. This limitation is caused by the current PC architecture in which the missing 0.5GB of memory addresses are reserved for PCI I/O space, AGP aperture mapping space and other onboard device I/O space. Thus although the chipset datasheet may claim memory support for up to 4GB, the system actually only offers about 3.5GB with four 1GB DDR DIMMs installed. Do not expect a BIOS fix and do not expect it to be different on any other motherboard - 32 bit processors only support 4GB of address space! Reducing your AGP aperture to 32MB may help matters by freeing up some AGP aperture mapping space (assuming you currently have a larger aperture set).

Hope this helps

Luck.............:D

im not sure i understand the point in doing that when you can operate a computer fine with 1gig of ram.... (depending on what you do)
 
Originally posted by Jason711
4GB would be sweet...

id setup a ram disk and put the swap file on it.

that'd be wicked fast..

Doesn't that defeat the entire purpose of a swap file? Why not just disable it if you're going to do that?
 
Back
Top