Mother Necessity PSU Mod

I just fitted mine externally when it was too large for the case I had (years ago).

Phil's is quite an extreme solution lol.
 
Isn't there a ghetto mod thread somewhere? This definitely should be in there. What I don't understand is how there could even be enough components stuffed into that case to need that much power in the first place!
 
My guess is the case had a micro-atx PSU in it, and it died. All they had around was a regular sized PSU and said, "Ok.. Let's get the Dremel..."
 
I've done something similar to another case. I forget the format of the PSU, but it was like an ATX PSU on the back, but only about 3" deep. So I had to do some trimming to make a regular ATX PSU fit (because I needed more power) and it ended up being only about 1/2" from the DVD drive which had to be the shorter style to get both to fit.
 
Or you could click 'continue shopping' and add a new case to the shopping cart.
I can't imagine that PSU was just laying around, or they would have had a better case just laying around as well. Eeeeh, desktop cases annoy me. Did I mention I only use full towers? :)
 
Just seeing the second (female) power plug on the PSU made me think that it could be a ticking time bomb.
 
Necessity, who is the mother of invention.

Plato, The Republic
(427 BC - 347 BC)
 
Reminds me of something I did back in the day (I was 12).

One of my good friends had a Gateway desktop that had a very slim case. We sawed the case open over where a Geforce 2 MX couldn't fit previously.
 
My Athlon XP computer had 2 power supplies for a while. I used a paperclip in the second PSU's 24pin connector to power it on. I used a drill to put air holes in the side of the case too, it looked really bad but worked really good lol
 
Yea I had an old PSU externally running my file server/dl server but this is "cleaner"

I LOLed when I saw this pic reminded me that
 
I had an old Gateway tower that was thinner than a typical case. When the PS died I purchased a new one and did not realize their cases were a half inch thinner than a standard atx case. So I just took it into my shop and cut up the frame until it fit. Funny thing was I could get the door on if I forced it, don't know why it never broke. You could see exactly where the ps was because there was a bulg.
 
Just seeing the second (female) power plug on the PSU made me think that it could be a ticking time bomb.
Agreed.

The second power plug means it is an old AT power supply, not ATX.

The machine itself is most likely several years old, but putting an AT power supply circa 1995 in there with god knows how many adapters to get it to work makes me think the same thing as you...ticking time bomb. TBH, I'm surprised that thing even booted. That thing would have to pre-date the Pentium4 for an AT power supply to even have enough amperage to boot up.
 
This is awesome, and not in the making fun of way that some of you think of it. :p
 
I don't think I could force myself to do that. I would have done something simpler and cleaner like mount it on the outside of the case - sleeve the wiring - and make a hole to route the wiring through. Paint the PSU black, and it would have been easier and better looking. If you really are worried about air-flow, a small fan would be easy to rig.
 
That appears to be one of the small form factor HP's - like a D530sff or maybe a D510sff. Ghetto moddin' at it's finest right there fo sho. :D
 
Back
Top