• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

LLC/VDroop question

S

SinShiva

Limp Gawd
Joined
Nov 20, 2009
Messages
330
After getting a new case, mobo (asus x58 sabertooth) and hsf, i've since achieved a better overclock. Right now, i'm at 4.2ghz using 1.39vc, 1.32qpi with htt off, LLC off/VDroop on.

When i run small ffts in prime95, my voltage in cpuz/ohm drops to ~1.32. If i turn LLC on, would i lower my voltage to this and expect the same results as i am achieving with 1.39 ?
 
Last edited:
The only way to know for sure is to try it out yourself and see what happens. Every board and chip will behave differently.
 
Sounds like an underpowered PSU with that much droop! If you set the VCore to 1.32v and set llc [on], you *might* droop yourself into BSOD!

Chances are, you'll need 1.35v+ on the 920 for 4.2!
 
You must log in or register to reply here.
Back
Top