• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Leviathan--pending title

Soarin

Soarin

2[H]4U
Joined
Jul 23, 2010
Messages
2,489
Okay after trying sketchup for the first time, or any cad program. This is what i would like to build with tweaking left. Just trying to figure this out. Also the downside is i would have to also take the dimension to someone and have them cut and bend the parts for me because i do not have a bender or anything.

completedcase2.jpg

completedcase.jpg

By bigdaveberg at 2010-12-22
completedcase3.jpg
[/URL]
To give you an idea the cap toggle switches control the cold cathodes, i will more than likely add enough switchs for each cold cathode. The push button switch is for the on/off and reset. Which the little silver plate under them will say "Deploy" "Re-Deploy". The top peice has a litttle dish, that will be my wifi dish. The dish is on a vent that will be the exhaust uptop. And yes that is a cupholder. I have cold cathodes inside the case next to mobo tray and near the rear 120mm fan and up front in the front cupholder round section, one up in the vent(lookng to move it back) and the last CC under the optical drive bay which is represented by black boxes the same size as drives.

And the black area is a hinged side panel so that i can do wire management on the side panel without the window. I also have cut out in there but are unable to see them due to black inside.

This is a start and i do not know when i will start this because of resources. I will be getting the dimensions and calling around.
 
Last edited:
After a fresh start this morning i was looking, and I do not like the front face, it is too bare. So when i get a chance i will be editing this to make it look different.
I was not all there last night. We made egg nog shakes. The Adult kind. :D They were good. :p
This is one of the design i would like. The other one consist of the same basic outline except, no cap switches, antenna, or fin,or cupholder. Also the paint job would be different. The side panel covering the wire management route would have a Dragon head design with acrylic behind it and some lights making it pop out. ANyways this is a Work in progress. But i thought would share my VERY FIRST time design of a case or any mod. Changes are sure to be prevelant.
 
This looks somewhat interesting..... what is that thing bulging out the front though? SO far I am looking forward to see how it turns out. Best of luck!
 
It is just a intake air chamber. With a UV cold cathode installed. Also it doubles as a cup holder! WOOT. I am a lazyish geek i want my drink sitting by me and i be damned if my desk has enough room. lol
Anyways i am reworking the case i have some more ideas, and whatnot. But this is a preliminary design that will be improved upon.
 
I am inspired to do a design like this because my cousin is in Kuwait. And has been on duty for 3 years, and i miss him deeply. He was almost my brother, cause my aunt wanted to give him for adoption almost(hard times).
 
You must log in or register to reply here.
Back
Top