AznAnarchy99
[H]ard|Gawd
- Joined
- Jan 18, 2005
- Messages
- 1,187
POS installation was a b!tch omg. First i had to take off my old xp-90 which was amazingly hard seeing how tight the clips were. Then i made the horrible mistake of installing the fan on the HS first, which proved to be really bad because then my memory got in the way and so did my power lines. I made another mistake to remove the power lines to make room for the heatsink and i had the horrible experience of putting them back on once the hs was on (leaving me with various bleeding knuckles since the fins are pretty sharp). Then i put the fan on which was much easier since i was playing around with how to put it on for about 15 minutes before i took it off to put it in the case... Finally i moved my memory back into its proper slots now that i had some more room. i got tired and didnt bother with cable management so i just plugged everything in and turned it on.
All in all, it was worth it. The Yate-Loon Fan i have on thee Ninja is amazingly quiet, the only thing i hear now its my 7800gtx and a very very very very mimimal hum from my TT 120mm fans. CPU temps used to be at a 40 idle and now its at a 37 idle before a burn in. My HD temps are also down
All in all, it was worth it. The Yate-Loon Fan i have on thee Ninja is amazingly quiet, the only thing i hear now its my 7800gtx and a very very very very mimimal hum from my TT 120mm fans. CPU temps used to be at a 40 idle and now its at a 37 idle before a burn in. My HD temps are also down