is this setup any good?

[lilfiend]

first time water cooler here i wanted to know if these were a good setup
http://www.xoxide.com/3id1odclvitu.html some 3/8 tubing, only need 3 ft or so
http://www.buy.com/retail/product.asp?sku=208131189&listingid=23607408&dcaid=17902 i need this for an am2 mobo but idk if it will fit, looks like it has the 775 mount on it
http://www.newegg.com/Product/Produ...le-_-Water+Cooling-_-Swiftech+Inc.-_-35108097 moves a lot of water and seems to be 3/8 so and its small wich will help (i plan to move to a matx case
http://www.frozencpu.com/products/8...ctor_High-Flow_Reservoir_12_ID_and_38_ID.html random res, i need one b/c i dont like the T fill things

all in all does that look like a good setup? i have no idea for a radiator yet so i need some sugestions but it has to stay cheap, i want performance but i only have $200 to spend here

 

[LOUISSSSS]

the pump and reservoir are good but you'll need a better block and other stuff

get this:
-look for used Swiftech Apogee GT or Fuzion v1 used for $30-35
-MCP655 for $70
-MCR220 or 320 (i think the 320 is the better deal)
-use masterkleer 7/16"ID 5/8"OD Tubing.
-DD Fatboy barbs on all your parts except the pump.


you CAN get that MCP355 pump, but with it, you'll also need either: XSPC Reservoir Top, or XSPC Top.

 

[lilfiend]

alright ive decided to use the mcp655 and the mcr220 with dd fatboy barbs, im going 1/2 on everthing and for a res i found a cheaper one that looks about the same size, other then that i cant find the fuzion v1 at all and for the apogee gt it looks like it might win this the reason im going 1/2 is b/c the mcp655 was 1/2 and it was easier that way