Intel Teases New “Ruler” SSD Form Factor

Megalith

24-bit/48kHz
Joined
Aug 20, 2006
Messages
13,000
A marketing slide has revealed that Intel will be releasing ruler-shaped SSDs for the enterprise market: these long and skinny drives should allow for even denser storage racks, such as 1PB in a 1U server. If you wanted to do the same with 10TB hard drives, a fully loaded, 100-bay 4U server would be required. There is no word yet on whether this form factor will show up in consumer products.

As part of Intel’s Optane roll-out, new ways of handling data storage at the enterprise level is cropping up. The shift to solid state storage is still ongoing, but it brings with it an opportunity to experiment with new ways of handling that storage. Classic hard drives have defined the form factor for SSDs up until fairly recently, with 3.5-inch and 2.5-inch drives being the norm. Since SSDs don’t have motors, and are simply a collection of chips, new form factors were made available, such as using PCIe add-in cards and the M.2 slot.
 
WTF-Shit-Memes-Wtf-is-this-shit..jpg
 
Name is a bit gimmicky but I can totally see the use case. That's a LOT of likely very fast and reliable storage you can pack into a small space and power footprint.
 
Nice to see 3D capacity ramping. Even if "meant to replace hard drives" means less than stellar performance, being able to stack 40 or so of these sticks in the width of a rack server means more channels to total up to useful IOPS

Don't be a damn barbarian, you need the meter stick release. Everyone knows metric storage units give a speed increase.
Even in Europe, some things are still measured in inches
 
Don't mind the idea of a format switch. Just hope Intel doesn't patent or copyright it and instead lets others copy the format so we don't wind up with several incompatible competing form factors.

Have to wonder how much storage you could fit in a 3.5" form factor?

Don't be a damn barbarian, you need the meter stick release. Everyone knows metric storage units give a speed increase.

Not sure about speed increase but it does give a Length increase!
 
i wonder if they will make drop in replacements for DIMMs. you could have 1 bank of ultra fast DIMMS, with many banks of SSD's. a striped bank of 32 could be VERY fast
 
.........Just wait for the lego/k'nex form factor versions with the PCIe riser so you could fit memory into the cubby holes and other unused spaces in cases ;)
 
They already have the m.2 format for consumers, its kind of backwards they didn't do anything like that before the consumer market. Make sense with the shrinking size of storage though. Its funny the physical size gets smaller but the data capacity increases. That idea always fascinated me.
4368314776_c8223ea75e_o.jpg
(A 250 MB hard disk drive from 1979) to
microsdxc.jpg
 
They already have the m.2 format for consumers, its kind of backwards they didn't do anything like that before the consumer market. Make sense with the shrinking size of storage though. Its funny the physical size gets smaller but the data capacity increases. That idea always fascinated me.
4368314776_c8223ea75e_o.jpg
(A 250 MB hard disk drive from 1979) to
microsdxc.jpg

hopefully you know they don't really make 2TB sd cards.
 
They already have the m.2 format for consumers, its kind of backwards they didn't do anything like that before the consumer market. Make sense with the shrinking size of storage though. Its funny the physical size gets smaller but the data capacity increases. That idea always fascinated me.
4368314776_c8223ea75e_o.jpg
(A 250 MB hard disk drive from 1979) to
microsdxc.jpg

Yeah, Bigtime! Has fascinated me also.

Back in the day when Hd manuf's had names like "Connor" and "Maxtor", IBM R&D invented something called "Giant Magnetoresistive effect".

It made possible a 20x increase in a harddrives capacity.

Giant?

Yeah, and its based on "quantum mechanics".

A 1gig Hd could now store 20 gig 'in the first implementation'.

Our spinning HD's are based on the physics of nano scale.

The inventors won a nobel prize.
 
Last edited:
I really like the idea of externally accessible storage you can just pop out and take with you. But then I'm from the floppy disk generation. I have drive trays for 3.5" and 2.5" drives but M.2 + external access would be great.

images
7c5e3390c2a6985b813690d931053d26.gif
 
I really like the idea of externally accessible storage you can just pop out and take with you. But then I'm from the floppy disk generation. I have drive trays for 3.5" and 2.5" drives but M.2 + external access would be great.

images
7c5e3390c2a6985b813690d931053d26.gif

...dont overlook portable SSD's. Transfer rate depends on the computer that you are exchanging files with.

USB 2.0, thats what you get.

3.0, yep.

Thunderbolt? Yep!

M.2, not yet :(

But when dealing with the capacities of the drives that portability gives you, 3.0 is good enough. Thunderbolt if you are exchanging huge video files.
 
...dont overlook portable SSD's. Transfer rate depends on the computer that you are exchanging files with.

USB 2.0, thats what you get.

3.0, yep.

Thunderbolt? Yep!

M.2, not yet :(

But when dealing with the capacities of the drives that portability gives you, 3.0 is good enough. Thunderbolt if you are exchanging huge video files.
Actually it's more like I own a desktop, an ultrabook, and a gaming laptop. Instead of buying three 2TB drives, and running sync software, or lugging around my USB SSD, I really just need to move that drive to whichever computer I want to use. I've found that Windows doesn't even complain when I pop out the SSD from one computer and placed in another, even AMD and Nvidia control panels just hide themselves when the hardware isn't present instead of complaining. All my files are up to date and no need for cloud sync, or patching games on two of the PCs each time etc. No need to turn on each computer to use Revio sync or wait for data to transfer over the network. Most of all, it's cheaper this way, I'm currently paying to store three copies of all my apps, when I could just splurge on one big SSD.
.
 
Actually it's more like I own a desktop, an ultrabook, and a gaming laptop. Instead of buying three 2TB drives, and running sync software, or lugging around my USB SSD, I really just need to move that drive to whichever computer I want to use. I've found that Windows doesn't even complain when I pop out the SSD from one computer and placed in another, even AMD and Nvidia control panels just hide themselves when the hardware isn't present instead of complaining. All my files are up to date and no need for cloud sync, or patching games on two of the PCs each time etc. No need to turn on each computer to use Revio sync or wait for data to transfer over the network. Most of all, it's cheaper this way, I'm currently paying to store three copies of all my apps, when I could just splurge on one big SSD.
.

Good information (y)

Wouldnt have expected it to be so straight foward. Will have to remember this in the future. Maybe a reason to bring back the 5 1/2" drive caddy. I am sure there is a way to get a caddy that will fit an sata ssd, might have to Mcgyver a u.2 formfactor. Cant see a way to get a M.2 to fit into a caddy though. Would need some kind of circuit board with the M.2 connectors and a PCie riser with a cable long enough to connect to the caddy.

Thanx for the idea.

*********************** edit add info *************

I just reread your original post and see that you have drive trays. We are on the same page.
 
Last edited:
AdandTech says Intel claims that they're PCIe 5.0 ready. I didn't even know that was a thing. Anywho - I think this is absolutely fantastic. I forsee a SAN based off of these.

How about an AMD based SAN with 128 PCIe lanes, to handle both this storage and the needed 100Gbs cards to take advantage of this.
 
Back
Top