Intel DG43GT Wierd Boot Issue.

P4Power

Limp Gawd
Joined
Oct 1, 2006
Messages
185
I am putting together a new system as a personal web server to play around with and have run into a snag. I had originally planned to install Ubuntu 11.10 Server x64, but the machine just enters an infinite reboot cycle. As soon as it starts reading the disc it reboots. At first I thought the burn was bad, but after burning three different discs in three different drives as well as re-downloading the ISO, it still does it. So, I decided to stick in my Windows XP Pro x64 disc and it booted right into the setup! The next thing I did was go to Intel's website and see if there was an update BIOS, but it already had the latest version installed. What is the deal with this thing? Is there anyone who has any idea what to try next?

Specs:
3.0GHz Xeon 3085 Conroe
4GB G.Skill PC2-5300 Dual-Channel
250GHz WD Caviar Green SATA HD
Intel DG43GT Motherboard
NVIDIA Quadro NVS 295
460W CoolerMaster PS
 
drive gone bad maybe?remove it and see what happens.
If you have a spare one try it out.
Or try to update firmware of the drive if it has one.and check that isos md5 hash just to make sure you have the correct one.
Or could it be that you have downloaded the wrong version?usb version?check it out.
 
Last edited:
Thank you! I suppose something is going wrong with my external USB drive. I swapped in an internal drive from another machine and it started right up. I can't believe I didn't think of the drive being messed up!

Thanks again!
 
No problem
Glad to see your issue is fixed
It could be that there is nothing wrong with the drive since you mentioned its an external usb drive.
I did not use that type of drives yet.
Maybe its a bios setting that needed to be applied.
 
Last edited:
I have never had any problems with the drive before and what really gets me is that it will boot a Windows disc and install without a hitch! What is so different about that Ubuntu disc?
 
It is really strange actually.
Try it again and set the drive as first boot device in BIOS.
If that does not work just leave it,since you have a spare drive.
Look it up thow,it might be something simple,or it has really gone bad.
Who knows? :p
 
Or maybe it does not like the disk you burned.
Did you change your blank disks recently?
 
I tried changing every BIOS boot setting I could with that external drive, but it never worked. I even plugged it into another machine to burn the disc thinking, well maybe if it burns the disc itself it can read it, but that didn't help either. I have switched to a new spindle of CDs recently which have to seemed to work well for music and stuff, but this is the first time I have tried to use them for an OS installation. Maybe they are a little wonky.
 
verbatim is the way to go.I always use those.
But its a little hard to find the original verbatims these days.
But either one should be ok.
I would suggest you to give it one more shot with different disks and even try to update the firmware of the drive if it has a newer version.
 
Last edited:
Back
Top