Information about ABIT KV8 PRO?

phaze

n00b
Joined
Jun 17, 2004
Messages
2
Hi, ive read some reviews on the KV8pro and they all mention non working agp/pci lock and some strange bios behaviors when overclocking or setting the multiplier at 9x.

All these reviews mentions that they tested a preproduction board and all these errors should be corrected in the shipping retail board.

Well the board is now available and I would like to know if anyone could confirm that the bios is in full working order :confused:
 
Trust me, do not touch this board with a 10-foot clown pole. I was going to buy it, but then I decided to check on abit's forums.... and them my jaw dropped. I was simply amazed how fucked up this board is.
 
M4d-K10wN said:
Trust me, do not touch this board with a 10-foot clown pole. I was going to buy it, but then I decided to check on abit's forums.... and them my jaw dropped. I was simply amazed how fucked up this board is.


how baout some info on thease problems instead of just a board flame....
 
Okay, then. The most common problems include (but not limited to):
1) Bus lock doesn't work with 90% of the chipsets. VIA still doesn't have an answer to why
2) Vdimm highly unstable past 3.2V. Abit lowered it to 2.8V in the later BIOS revisions
3) Board doesn't work properly with USB mice or keyboards
4) Multiplier is bugged. The board underclockes your CPU. The only way to fix this now is change the multiplier in wcpuid every time you boot. On some boards, the multiplier works correctly in some BIOS revisions. There are no boards where both locks and multiplier work correctly
5) The BIOS tends to freeze a lot when you attempt to save & exit, making some settings responsible inaccessible
6) The board doesn't want to be overclocked. It doesn't go past 215-ish FSB, no matter what people try. Different RAM, volt-mods, better cooling, or any combinations of those methods. One rogue board overclocks well (one guy got to 250 FSB on it).
7) The board has issues with some very popular memory chips. These include Winbond CH-5, BH-5, and AH-6. They don't work.
8) The board has trouble operating more than with more than one DIMM slot filled
9) The board has issues operating with most network cards, even at stock FSB.
10) Some popular ATi cards don't work. Such as 9700.
11) The board doesn't recognize USB 2.0 devices as USB 2.0. Operates at 1.1

I'm not going ot bother digging up any more problems for you. If you want to find out, quit pissing me off and go to Abit's forums like I told you to.
 
Back
Top