• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

IC7 MAX3 false temp readouts?

M

MAXX RS4

Limp Gawd
Joined
Feb 6, 2004
Messages
201
I think I remember reading somewhere that the IC7 boards like to give false temp readouts. Like, if the temp says 65C it's really like 50C..? Is this true?

My BIOS temp readings are always the same as on my HardMonitor.. donno if that makes a difference.

So is it true?
 
I remember hearing something like this about the IC7 boards. It was concluded that it was just the placement of the temperature sensors, as in it differed from other manufactures. I know on the IC7's it was about a seven degree difference. So really it's a true readout, just not from the location most readouts are done. Feel free to correct me if I'm wrong.
 
So, say I have a cpu reading of 50C, should I really consider it like a 43C?
 
The IC7 boards just read it completely wrong. They're about 10C on the high side after the latest BIOS update. I don't think its the sensor placement, but the calibration.
 
I hope you guys are right because I just bumped my vcore to 1.65v and im getting temps of 67C stressed..
 
Actually, Abit boards read the temperature more accurately than most.

Read an artical somewhere in which two setups, everything identical except Asus vs. Abit mobos, and use a heatsink with a thermocouple in it. The Asus board reported a CPU temp of 7 or 8 degrees less than the heatsink (which is impossible); the Abit report a temperature of 5 or 6 degrees hotter than the heatsink (which is reasonable, given the heatspreader and thermal goop between the the thermocouple and chip).
 
It's not really a topic of discussion around here anymore, but in the fall of 2003 there were lots of posts about the IC7 line reading way high, and comparing it to other brands or even boards by the same manufacturer. The IC7 line just reads much higher than it should.

And these are mobo reported tests, read from the temp sensor, and sometimes checked against the heat sink.
 
You must log in or register to reply here.
Back
Top