I suck at flashing BIOSes

CreamySoupUSA

I suck butt hole.
Joined
Jun 27, 2004
Messages
1,470
I have a MSI KT4V VIA KT4000 Chipset based mobo, and I was getting fairly high temperature readings (54 C idle). I decided that flashing the BIOS might help it (lowered it by 10 C :D ), but ever since the flashing was completed, I always get a "CMOS Settings Wrong" message in the POST. I can choose to go to setup, or load the default values and continue, although doing the former, I can't save, and doing the ladder, it (obviously) has the default settings, which suck and also keep my FSB at 100MHz. If anyone knows how to fix this, or has any suggestions, I would be in your debt... except I would only pay you with a thank you or two.
 
Have you already cleared the CMOS?

Edit: Woo! Just realized I'm not a n00bie anymore!
 
try changing just one setting ... then save it, and reboot ...
 
try to reflash ... you've got a corrupt CMOS ... use the Live Update 3 ,,, I have no problems using that on any MSI board ...
 
Sigh... nope. Should I flash it to an earlier BIOS?

EDIT: When I say nope, I mean it does the same thing.
 
pull out all pci cards
unplug HDD and CD-DVD
one stick mem
try to boot with win 98 boot floppy

try clear cmos utility:
http://www.unicore.com/techsupport/award/awardutils.htm

try a "hard clear" - set BIOS to defaults, shutdown, unplug cord from wall, short the cmos, take out battery, let sit for a few hours - overnight if poss. put batt back in, unshort cmos, plug in cord, turn on PSU.

There is also a bios protect feature on some mobo which disallows flashing to prevent boot virii. Make sure that is disabled. You may have "confused".
 
Alright guys, I got it working! The first time I flashed it, I did it the way MSI told me to, holding down ctrl+home during a restart with the floppy in the drive. I did that a few more times with no luck. Then one lucky time, I booted it up but forgot to take the disk out, so the computer booted up the disk and I flashed it from there, which worked fine. Thanks for all the help anyway guys!
 
cisco guy said:
short the cmos, take out battery, let sit for a few hours - overnight if poss.

Why would it take so long to erase the CMOS settings memory content?

.B ekiM
 
I know it doesn't sound rational, but I have been thru this many times over many years, and very strange things happen with bios corruption. I never fail to try the 24hr no juice option.

(However, I am typing this from an insane asylum)
 
Back
Top