I need a new power supply

Originally posted by Barnaby
PCP&C accept no substitutes

If you have a fairly expensive system Id agree with Barnaby

if your on a really tight budget, Antec True Power

[H]ardcore PSU Info
Good PSU to Buy? long thread

name of the game these days is line stability and transient response
(again for a bleeding edge system)

comparing what was acceptable last year, with the power requirements (stability wise) or the current crop of RAM\FSB\Chipsets
just doesnt work out that well (read those links)
 
Originally posted by artimasz
The rails on that thing are dead on, even /w 4 hdds and everything else hooked to it.
Four hard drives, is nothing. You would only need a good 350W power supply to run four hard drives with a comfortable safety margin.

lol...hey burningrave, they linked our thread! :p
 
Originally posted by Stiletto One


lol...hey burningrave, they linked our thread! :p

they? :p

it was thrashed around until locked, but contains some very good info ;)
(I also have the whole thread saved for posterity :p )
 
Originally posted by Ice Czar
it was thrashed around until locked, but contains some very good info ;)

Thrashed around is an understatement lol.

It went as far as to rival some of the late great A64 vs Pentium 4 threads :p .
 
Originally posted by burningrave101
Thrashed around is an understatement lol.

It went as far as to rival some of the late great A64 vs Pentium 4 threads :p .
Yeah yeah yeah, I wasn't trying to be HOSTILE at the end of it—I don't know what B.B.S. was talking about. :p (No hard feelings, right? Bueller? ...Bueller?)

Hey kronchev, silent Antec 412? You mean a PP412? I thought those actually still used fixed-speed fans. :confused:
 
Originally posted by Vertigo Acid
Bah, i'm unimpressed. Those connectors are no better than the cheap adapters they give you with the drives, because they don't have the newly standardized 3.3v line.

Yea, I can't recall any PSU's that have them, other than the 510 PCP&C models.. but, give it time, and more manufactures will put them on.. especially since the next gen chipsets are going to have 4+ SATA channels integrated into the chipset..
 
Originally posted by Barnaby
since the next gen chipsets are going to have 4+ SATA channels integrated into the chipset..

welcome to the future :p
I already have 4 channels
(w\ RAID 0, 1, or 0+1, unfortunately its still 32bit 33MHz)
 
yea, so will I when I get off my ass and get a DFI NFII Infinity to replace my A7N8X Deluxe.. I want my 200+ Mhz FSB damnit.. :D
 
well I just found out my SATA RAID chip (Sil3114 ) is having some RAID 0+1 "issues" like it wont rebuild the array

guess its a good thing I decided not to use it (because its 32bit33MHz)
hard to resist PCI-X when available :p
 
that sucks.. what bios and driver are you running? the latest bios and the current driver have some corruption issues.. luckily the latest bios isn't being used widespread, but it's possible you are using it..

uh.. think we're hijacking the thread again..
 
Originally posted by Barnaby
uh.. think we're hijacking the thread again..

well thats isnt new :p
when the original question gets answered, they tend to "migrate"
but since its getting bumped, a new related question or observation more often than not gets posted

Im running V 1.02 (which is the latest official for the K8W S2885)
Tyan and Silicon Image are aware of the issue and are working on it.
 
well, atleast they know about it.. I have to admit, I've been very happy with making the switch to SATA.. I actually abandoned my all SCSI rig to a SATA/ATAPI rig..

I just wish I could find shorter SATA cables, the 18's are too long.. I need 10's..
 
kick ass.. will have to order me a couple.. course I'll have to sleeve them with my shiny silver sleeving, so it's too bad they don't have non uv reactive ones.. but, that should cut down on my SATA cable clutter..

LOL, never though I'd have that problem... :D
 
Originally posted by Barnaby
kick ass.. will have to order me a couple.. course I'll have to sleeve them with my shiny silver sleeving, so it's too bad they don't have non uv reactive ones.. but, that should cut down on my SATA cable clutter..
I hate you.
 
what can I say, 18 inch SATA cables going from the mobo to only 5 inches away to the HDD rack on my Lian-Li is too frickin' long.. it's unsightly..

:D
 
Heh, yeah it doesn't matter what the interface is, the bottom rack is *always* cluttered. Dunno what Lian Li was thinking. Still very nice tho
 
Originally posted by Vertigo Acid
Heh, yeah it doesn't matter what the interface is, the bottom rack is *always* cluttered. Dunno what Lian Li was thinking. Still very nice tho

I really like the rack there, as it's a nice short distance from the SATA connectors.. they just need a tad bit shorter cables, and no more clutter.. all in all, I think my lian-li is the nicest case I've ever had to work on.. beats the shit out of all the antec 1080's I've played with.. but that's just my opinion.. :)
 
Yeah my PC-86 whups my chieftec 601 and addtronics 7896a. I'd replace the addtronics with a Lian Li if only the server tower offerings wern't so damn expensive!
 
yea, no joke.. they're really pricey.... just a normal desktop case is bad enuff..
 
Back
Top