hows this ?

[boomheadshot45]

radiatorouble heater core with fittings
Reservoir: Fillport Reservoir
Pump: 12V DD-D5 PumpTubing: Tygon 3603 Tubing 1/2" ID 3/4" OD
Waterblock gpu: Acetal Top MAZE4-1GPU Peltier Version
Waterblock cpu: Copper TDX Block for Athlon64 754/939/940
tubing: Tygon 3603 Tubing 1/2" ID 3/4" OD

Are the changes good.. bad or ugly? Anything else i should change ?thank you

 

[thewhiteguy]

Get a Swiftech MicroRes, Liang pump, and MasterKleer tubing. You should also think about a TDX rather than an RBX since there's not much room between the CPU and GPU to get the Y fitting in.

Are you on an extreme budget or something? I ask because if you had read even a few threads you wouldn't have chosen the old MAG pump and bay reservoir.

 

[malicious]

radiatorouble heater core with fittings
Reservoir: Danger Den dual 5 1/4 bay
Pumpanger Den CSP-MAG 12 Volt Pump
Tubing: Tygon 3603 Tubing 1/2" ID 3/4" OD
Waterblock gpu: Acetal Version MAZE4GPU
Waterblock cpu: Copper RBX for Athlon64 & Opteron 754/939/940

Any changers or anything i left out ... Also is it good bad or just horrible lol! Any feedback is great

thank you

i would go with just the single bay res if it were me(edit if i were going to use a bay res) ((actually i personally use a T line and fillport)).. dual bay res does nothing but take up space and use more liquid .. there's no real performance benefit...

also if everything is giong to have 1/2 od barbs .. I would highly suggest getting 7/16ths tubes .. the fit a little snugger and are generally easier to work with .. www.cooltechnica.com has 7/16ths masterkleer for 10bucks for 10 feet and i like it very much ...

if you're buyin retail go ahead and get the low profile version of the maze4gpu..

and i'm curious as why you went with the rbx and not the tdx ... need 3 barbs?



Here's mine just for kicks....

 

[thewhiteguy]

Why the fsck would you pay $10 for 10 feet when it's $3 for 10 feet at McMaster?

 

[malicious]

you bother me ...

it's 10 for 10 WITH SHIPPING

 

[thewhiteguy]

you bother me ...

it's 10 for 10 WITH SHIPPING

McMaster shipping is not $7, and it's really fast

 

[boomheadshot45]

sorry i'm a "noob" at this watercooling suff .. thank you for your input

 

[malicious]

we were all noobs once...

my advice... go big to start with .. you'll be more satified and it's not any harder that the little kits...

mal

oh and you should get your parts fromt he fs forum ... i bought almost all my wcing gear in there for 30-70 percent off retail...

 

[boomheadshot45]

i changed the stuff.. so how is it z NOW?

 

[domoMKIV]

Waterblock gpu: Acetal Top MAZE4-1GPU Peltier Version

you dont want the peltier version...

 

[thewhiteguy]

Needs MasterKleer tubing rather than the ripoff Tygon.

 

[boomheadshot45]

whats the difference between tygon and masterkleer.. i am asking this because i can't find any masterkleer tubes..

 

[thewhiteguy]

Tygon collapses too easily and costs way too much. You buy MasterKleer from mcmaster.com, just search for MasterKleer.

 

[Bbq]

The Masterkleer is what you want. It's thin, flexable, and cheap.

As for parts, try:

radiatorouble heater core with fittings
Heatercore shroud
Reservoir: Fillport Reservoir
Pump: 12V DD-D5 Pump
Waterblock gpu: Acetal Top MAZE4-1GPU
Waterblock cpu: Copper TDX Block for Athlon64 754/939/940
tubing: Masterkleer 7/16"