• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

How To Setup RAID

O

ohnnyj

Gawd
Joined
Jun 7, 2004
Messages
575
Hello all:

I have two 74GB Raptors and one 400GB Seagate all SATA that I am looking to put together. However, I want to put the two raptors in a RAID-0 array. I have heard that you need to load SATA and RAID drivers in order to get the WinXP setup to recognize the drives. Which drivers do I load first? Do I format all the drives first? Do/should/can I create multiple partitions on the RAID array and/or the Seagate drive?

Thanks.
 
You should be get into your raid controller via bios, you make the raid, then when installing windows you press F6 and when prompted put the floppy with the sata/raid drivers in and you're done. If sata and raid drivers are different disks, just press "S" to specify an additional device and stick in the floppy, all explained once you press F6 at install
 
You must log in or register to reply here.
Back
Top