Help with specs for a cheap PC upgrade

Banderon

Limp Gawd
Joined
Sep 20, 2002
Messages
282
Hey everyone. I'm planning on upgrading an old PC. I'm gonna get a new case, and want to put in a cheap mobo with onboard a/v and a cheap P4 with ~512MB. Yeah, key word is "cheap".

I'm not too up on what's out and good and cheap right now, been behind the times a bit. So, any advice on good systems would be helpful. I'm looking to spend as little as possible. This won't be a gaming rig; it'll be for basic office work and audio, maybe once a month, some overnight video encoding. So, just a low-level P4 and a not-too-many-expensive-features mobo should be fine.

So, all I need is:

Mobo
CPU
RAM

Thanks in advance for any advice. I'll be browsing newegg in the mean time.
 
If you want to save money, then you may want to consider an AMD solution. P4 chips tend to still be pretty expensive. As far as low price, look at a KT600 or nForce2 based board. Again, keeping in the low price realm a 1.8Ghz Duron can compete with 1.8Ghz P4 at only $50. Beat that for value. Figure the Chaintech KT600 board and a 1.8Ghz Duron and you're still under $100.
 
No, I need to go with a P4. A low-end P4 even, but not an AMD solution, nor a Celeron.
 
Then I would recommend the Foxconn 845GV4MR-ES and P4 2.4B. The Foxconn board it a basic 845 board with integrated sound, graphics and NIC. It's mATX and doesn't have any bells and whistles but, from what I've read, it's a solid board. I also purchased this board for myself to serve an inexpensive purpose and so far, no problems. The 2.4B is also an excellent mix of price/performance. This one has the Northwood core which generates less heat and performs a little better that the Prescott version.
 
Gotta love having clients who's technological choices rest on "Well, I had an Intel chip in my computer 10 years ago, and it worked well, so let's just stick with that. That new P4 sounds good."

I haven't dealt with Intel chips in a while, so I'm not to current with what's in the arena at the moment.
 
If you go with the P4, I'd go for the 2.8 LGA 775 -- Hyperthreading with an 800FSB. Makes better sense for upgradibility on the cheap down the road, if needed.

That's 166 at newegg.


You can go with the Foxconn MB above for 55, or you can go with something with a little more: The Foxcon 8487MB-s for $54, and then get a el-cheapo video card that has support for 2 outputs such as the Rosewill 9200se 128meg video for 42 bucks, plus 7 for a VGA adapter for the DVI if you need it for a CRT -- In a buisness enviroment, dual monitor support can make a huge difference, and as the costs of LCD's come down, having multiple monitors can make a real productivity enhancement in a way having a faster cpu-wasting computer can't. (Multiple spreadsheets on multiple monitors!) Having 128 megs is important if you want to run higher resolutions -- If this is going to be a workhorse cheapie computer in a biz enviroment, upgrading to larger LCD's down the road is a upgrade I see alot.

Memory is easy, juat get whatever special they have that day on ddr400, in pairs (so the video encoding will work faster)
 
Back
Top