• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Help with case expansion construction?

S

Stuey83

Limp Gawd
Joined
Mar 8, 2006
Messages
485
Bottom line - my lanboy is too small to fit my watercooling components. The radiator cannot be placed at the rear of the case even though I have a radbox, due to tubing routing issues, and it cannot be placed ontop of the case b/c I flipped my PSU and cut two blowholes in the top - one for the PU fan and one for a fan to cool the ram slightly.

Sooo I need to construct an expansion to my case and will place it either above or below the case.

Can anyone suggest whether the radiator should be laid flat, or vertically as depicted?



I plan on using four stainless steel tubes for vertical support, and aluminum channeling for horizontal beam supports. Should I use my 1/2" steel tube bars as supports at the ends or at two midpoints? Whichever option I use, aluminum will be used as complementing vertical supports at the other positions.

Any other suggestions are also welcome!
 
You must log in or register to reply here.
Back
Top